2Talk: Panasonic cordless, PAP2T and chch number

Forums › VoIP › 2Talk: Panasonic cordless, PAP2T and chch number

DonGould

3892 posts

Uber Geek

#71969 19-Nov-2010 18:12

Afternoon all...

Got my PAP2T hooked up and sort of programed...

I set up a local chch number 03 929 0021.

I can call from my cordless (03 348 7235) to 03 929 0021... OK

However when I call from the PAP2T to 03 348 7235 I have to dial 03... not just 348... I assume this has something to do with the dial plan?

When I plug my Panasonic cordless in to the ATA I can't call anything... I can receive calls but not place them (even remembering to dial 03...)

Any tips and tricks given my configuration?

johnmo

113 posts

Master Geek

#406864 19-Nov-2010 18:20

go to 2talk website. Under support they have an installation guide for pap2t's

Works for me every time.

DonGould

3892 posts

Uber Geek

#406869 19-Nov-2010 18:41

Yip, followed that. got it to accept calls and make calls using an old phone... but don't understand the dial plan thing, just copynpaste the example...

also don't get why it doesn't work with my cordless.

old3eyes

9119 posts

Uber Geek

Subscriber

#406883 19-Nov-2010 19:13

This is the one I use on mine. It's in Auckland but should work down there. Just copy ans paste into your dial plan

(0[2-9][2-9]xxxxxx|[2-9]xxxxxx|021x.|0508x.|0800x.|027x.|028x.|022x.|029x.|00x.|1xx|*x.)

Regards,

Old3eyes

DonGould

3892 posts

Uber Geek

#406892 19-Nov-2010 19:30

old3eyes: This is the one I use on mine. It's in Auckland but should work down there. Just copy ans paste into your dial plan

(0[2-9][2-9]xxxxxx|[2-9]xxxxxx|021x.|0508x.|0800x.|027x.|028x.|022x.|029x.|00x.|1xx|*x.)

Thanks... 2Talk say: ([2-9]xxxxxx|0[34679][2-9]xxxxxx|0210xxxxxxx|0212xxxxxx|021[3-9]xxxxx|02[0279]xxxxxxx|0240xxxxxx|024[1-9]xxxxxxx|0282[4-5]xxxxxx|050xxxxxxx|070xxxxxxx|080xxxxxxx|00xxxxxxx.|01[08]|017xx|12[356]|[19]11|*55|023xxxxxxxx|01[1234569]x.|02[56]x.|028[013456789]x.|0282[0123467890]|0282[01236789]|05[1-9]x.|08[1-9]x.|0[34679][0-1]x.|1[03456789]x.|11[023456789]x.|12[0124789]x.|*[012346789]x.|*5[012346789]x.)

which is really long compared to yours... can you give some explanation? I don't even follow what the syntax means at present... (though looking at your example which is much simpler it starts to make some sense).

DonGould

3892 posts

Uber Geek

#406903 19-Nov-2010 20:14

humm... that did fix the dialing problem for me thanks. I can now just dial 348 ... and it rings though

Thanks.

now just got to figure out what the problem is with my cordless phone and why that won't work.

DonGould

3892 posts

Uber Geek

#406907 19-Nov-2010 20:30

Ok... cordless now seems to work just fine as well... strange... wonder if I just has something wrong in the field.

However the line level is quiet. On a couple of test calls the volume goes down quite a bit after the ringing finishs (ie called party answers).

idea?

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#406919 19-Nov-2010 21:02

Nice to see 2talk have updated their dialplan. Even if they have used a lot of my hard work!

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

allan

2043 posts

Uber Geek

ID Verified

Lifetime subscriber

#406924 19-Nov-2010 21:22

How old is the Panasonic Phone? Some of the really old ones that had the large handsets with the fixed rigid aerial at the top and a channel change button suffered from this problem (not sure of model sorry). Had one myself and ditched it and bought a Panasonic DECT phone in the end. Also connected to a PAP2T

DonGould

3892 posts

Uber Geek

#406927 19-Nov-2010 21:29

na, it's a dect unit - KX-TCD510NZV

~7 years old.

old3eyes

9119 posts

Uber Geek

Subscriber

#407063 20-Nov-2010 13:30

DonGould:
old3eyes: This is the one I use on mine. It's in Auckland but should work down there. Just copy ans paste into your dial plan

(0[2-9][2-9]xxxxxx|[2-9]xxxxxx|021x.|0508x.|0800x.|027x.|028x.|022x.|029x.|00x.|1xx|*x.)

Thanks... 2Talk say: ([2-9]xxxxxx|0[34679][2-9]xxxxxx|0210xxxxxxx|0212xxxxxx|021[3-9]xxxxx|02[0279]xxxxxxx|0240xxxxxx|024[1-9]xxxxxxx|0282[4-5]xxxxxx|050xxxxxxx|070xxxxxxx|080xxxxxxx|00xxxxxxx.|01[08]|017xx|12[356]|[19]11|*55|023xxxxxxxx|01[1234569]x.|02[56]x.|028[013456789]x.|0282[0123467890]|0282[01236789]|05[1-9]x.|08[1-9]x.|0[34679][0-1]x.|1[03456789]x.|11[023456789]x.|12[0124789]x.|*[012346789]x.|*5[012346789]x.)

which is really long compared to yours... can you give some explanation? I don't even follow what the syntax means at present... (though looking at your example which is much simpler it starts to make some sense).

No explanation as the one I sent to you was from their webpage setup guide when I setup mine about a year ago.. Glad you sorted it though..

Regards,

Old3eyes

DonGould

3892 posts

Uber Geek

#407066 20-Nov-2010 13:37

I fixed the dialing... now I've just got sound quality issues. sounds distorted. I've played with the levels

FXS Port Input Gain: -2
FXS Port Output Gain 1

now the next problem is that the line sounds like an off tune radio.

Not really sure what you change to fix that.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#407069 20-Nov-2010 13:47

DonGould: I fixed the dialing... now I've just got sound quality issues. sounds distorted. I've played with the levels

FXS Port Input Gain: -2
FXS Port Output Gain 1

now the next problem is that the line sounds like an off tune radio.

Not really sure what you change to fix that.

They are way to high, you should have them on the default levels or possibly down as low as -9 for some handsets. You also need the correct FXO port impedance.

DonGould

3892 posts

Uber Geek

#407071 20-Nov-2010 14:04

I had much lower levels and couldn't hear properly and was told that I was to quiet. The volume is good now.

FXO port impedance. - I assume that should be 600ohm, no idea how I set that either, I just followed the instructions on the 2t site (which were very good I confess)... nothing simple about setting one of these boxes up, that's for sure. (going to work on that problem next with some simple scripts to just whack all the settings in unless someone's ready done that and I just didn't find the info).

On a side issue...

http://b.scorecardresearch.com/beacon.js
http://secure-nz.imrworldwide.com/v60.js
http://www.feedburner.com/fb/images/buzzboost-pwrd.gif
http://www.google-analytics.com/ga.js
http://www.google.com/coop/cse/brand?form=cse-search-box&lang=en

What am I blocking that I shouldn't be that's causing gz to loose the reply buttons and half the post on the right hand side?

http://www.bowenvale.pointclark.net/wp/gz.jpg