Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


bobmeister

106 posts

Master Geek


#79780 22-Mar-2011 11:37
Send private message

I have recently leapt into VOIP to replace my home Telecom line, (which does not work when it rains).  Broadband is fine.

I signed up with 2talk and have got a Linksys SPA-2102 and iPhone running Bria connecting and working well at home.

The iPhone works well on 3G, so I can conclude that my configuration for connecting to 2talk is correct.

At work, I thought it would be cool to be able to use the home phone there too, (I look after IT), we have a MS ISA server.

The iPhone will not connect to 2talk at work.  I assume that the ISA server is preventing the conneciton to 2talk.  I have opened ports 5060 TCP and UDP, 50600 TCP and UDP, 5004 UDP, 10000 UDP 16348-32768 UDP and 3478 TCP and UDP on the advice of 2talk.  Still no joy.

Has anyone had any success in getting Bria on the iPhone connecting to 2talk from behind the ISA Proxy?

Thanks in advance.

Create new topic
sbiddle
29274 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  #450706 22-Mar-2011 12:42
Send private message

Does it register with no audio or fail to register at all?

If you get registration and no audio you're not opening the correct ports for RTP audio.
I don't know what ports 2talk use but you can get an idea looking at the SPA2102 status page during a call.

bobmeister

106 posts

Master Geek


  #450735 22-Mar-2011 14:16
Send private message

It does not register at all.  Good advice.  I will check out the SPA-2102 tonight.

Cheers

 
 
 
 


acetone
118 posts

Master Geek


  #450766 22-Mar-2011 15:14
Send private message

How do you deal with the multiple phones registering to the one sip.  I have the same setup but have found that the last device to register gets the incoming calls.  So if i register the voip software on my android that is where it will ring and not my phone at home.  I want it to ring in both places.  Any ideas?

bobmeister

106 posts

Master Geek


  #450787 22-Mar-2011 15:35
Send private message

I am not quite an expert in this and I can't quite be sure, but I am fairly certain that each phone rings on an incoming call.

In the 2talk setup under the Locate Me/One Number section you can enter the numbers eg, 2819500, 2819500-1, 2819500-2 for each phone and while you are doing this in the "Ring this Number" drop down, select the "At all times" option.

i'm pretty sure that this will do it.

sbiddle
29274 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  #450790 22-Mar-2011 15:38
Send private message

acetone: How do you deal with the multiple phones registering to the one sip.  I have the same setup but have found that the last device to register gets the incoming calls.  So if i register the voip software on my android that is where it will ring and not my phone at home.  I want it to ring in both places.  Any ideas?


You can't do this with SIP. The last registration will always receive the incoming calls.

2talk allow you to have mutliple extensions by allocating them a suffix and then using a ring group to ring them all at once.

acetone
118 posts

Master Geek


  #450793 22-Mar-2011 15:41
Send private message

That is what I thought.  Slight lapse in memory, im actually with Italk.  I will check the website out and see if they do extensions.

1eStar
1599 posts

Uber Geek


  #450931 22-Mar-2011 22:00
Send private message

Have you tried using the native 2talk app (free) from the app store? It is an old app with poor codecs and doesn't support multitasking, but should have all the 2talk settings correct.
Looking at mine it lists:

Rtp/media port: 51988
Sip port: 50600

Hth

 
 
 
 


paulspain
415 posts

Ultimate Geek

Trusted
Lifetime subscriber

  #450950 22-Mar-2011 23:11
Send private message

Microsoft ISA Server has been superceeded by Microsoft Forefront Threat Management Gateway 2010 (TMG 2010). You will need this new version (which is free is you have software assurance) to support SIP connections I believe.




Paul Spain
Founder: Gorilla Technology, NZ Tech Podcast


bobmeister

106 posts

Master Geek


  #451046 23-Mar-2011 10:27
Send private message

Thanks Paulspain.  That would explain it then.

Create new topic





News »

Nanoleaf enhances lighting line with launch of Triangles and Mini Triangles
Posted 17-Oct-2020 20:18


Synology unveils DS16211+
Posted 17-Oct-2020 20:12


Ingram Micro introduces FootfallCam to New Zealand channel
Posted 17-Oct-2020 20:06


Dropbox adopts Virtual First working policy
Posted 17-Oct-2020 19:47


OPPO announces Reno4 Series 5G line-up in NZ
Posted 16-Oct-2020 08:52


Microsoft Highway to a Hundred expands to Asia Pacific
Posted 14-Oct-2020 09:34


Spark turns on 5G in Auckland
Posted 14-Oct-2020 09:29


AMD Launches AMD Ryzen 5000 Series Desktop Processors
Posted 9-Oct-2020 10:13


Teletrac Navman launches integrated multi-camera solution for transport and logistics industry
Posted 8-Oct-2020 10:57


Farmside hits 10,000 RBI customers
Posted 7-Oct-2020 15:32


NordVPN starts deploying colocated servers
Posted 7-Oct-2020 09:00


Google introduces Nest Wifi routers in New Zealand
Posted 7-Oct-2020 05:00


Orcon to bundle Google Nest Wifi router with new accounts
Posted 7-Oct-2020 05:00


Epay and Centrapay partner to create digital gift cards
Posted 2-Oct-2020 17:34


Inseego launches 5G MiFi M2000 mobile hotspot
Posted 2-Oct-2020 14:53









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.