How setup GoIP GSM gateway as trunk on Elastix?

Forums › VoIP › How setup GoIP GSM gateway as trunk on Elastix?

teamextra

3 posts

Wannabe Geek
Inactive user

#81293 11-Apr-2011 05:27

Hi,

Could you please tell me steps by steps to set GoIP 1 x GSM gateway up&running as a trunk on Elastix 1.6? Its picture is here.
http://www.hybertone.com/en/pro_detail.asp?proid=10

I read the manual but cannot figure out how to do it.

Thank you for your time,
David

Ivor

72 posts

Master Geek

#459164 15-Apr-2011 14:22

You need to set up a trunk on Elastix something like

[gsm-gw]
disallow=all
allow=alaw&ulaw
canreinvite=no
context=from-internal
dtmfmode=rfc2833
username= (use whatever you like)
fromuser= (use whatever you like, same as username)
secret= (password - use whatever you like)
host=dynamic (or you can blind to a static IP if you have one)
insecure=port,invite
type=friend

Then you get your VOIP-GSM gateway register to this trunk.

After that, you need to set up outbound route on Elastix for calls to go through this trunk with a dial pattern like "021X." or "027X." or whatever it suits for free calling destinations.

Hope it helps.

teamextra

3 posts

Wannabe Geek
Inactive user

#459564 16-Apr-2011 22:00

I get "The number you have dialed is not in service."

Here are screenshots of my setting.

GoIP Setting

GoIP Status

Incoming

Trunk

Ivor

72 posts

Master Geek

#459626 17-Apr-2011 11:01

I guess 208.111.39.91 is your Elastix server IP?

There are a few things need to be changed.

1)
In the trunk setting, you should use
"host = dynamic"

Or if your GOIP gateway is under a static IP, only you should assign
host = xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx is your where your GOIP device's IP, NOT the elastix server IP)

Also if the GOIP gateway is behind a router or firewall, please add
"qualify=yes"
to "PEER Details" under this trunk.

2) Please remove "875045010" from the "DID Number" BOX under Incoming Route for testing purpose.

Now, you should be able to get imcoming call from GOIP gateway at this stage.

3) You will need to add Outbound Route as well if you wish to dial out from the GOIP gateway which you haven't got one from screenshots supplied.

4) After changing this, if it still doesn't work. Please SSH to your elastix server
(Download the free putty client to ssh to your server)

Login to your server.
Under the linux command, type in
Asterisk -vvvvvvr
Once connected to Asterisk,
type in
sip show peers

and post the results here

Good luck, sir!

teamextra

3 posts

Wannabe Geek
Inactive user

#459654 17-Apr-2011 13:09

Hi,

Thank you. My GoIP works perfectly right now. The setting is simple but it takes me a week to get it up&running

.

If anyone needs help, I can be reached at info@bangkokhomecondo.com.

Thank you again for your help.

David

Ivor

72 posts

Master Geek

#459673 17-Apr-2011 14:03

teamextra: Hi,

Thank you. My GoIP works perfectly right now. The setting is simple but it takes me a week to get it up&running .

If anyone needs help, I can be reached at info@bangkokhomecondo.com.

Thank you again for your help.

David

No worries but you please remember to change your "1234" password or someone will steal your VOIP minutes from your Elastix box.