2talk not working now.

Forums › VoIP › 2talk not working now.

richms

20026 posts

Uber Geek
+1 received by user: 3703

Trusted

Subscriber

Topic # 81501 13-Apr-2011 21:21

Ive logged the fault on here, but is anyone elses 2talk not working, cant load the 2talk portal either.

Richard rich.ms

kfella2000

484 posts

Ultimate Geek
+1 received by user: 8

Reply # 458459 13-Apr-2011 21:59

My 2talk line is working can make calls no problems but yes I cant load the 2talk portal either

richms

20026 posts

Uber Geek
+1 received by user: 3703

Trusted

Subscriber

Reply # 458460 13-Apr-2011 22:01

Ok, I have tried several routers thisevening so it might be in that strange stuck state that sip gets. will leave it off for a while and see if it comes back after a while.

Richard rich.ms

mthand

148 posts

Master Geek

Reply # 458461 13-Apr-2011 22:01

2talk live portal is not working for me either, but I can still receive calls

richms

20026 posts

Uber Geek
+1 received by user: 3703

Trusted

Subscriber

Reply # 458466 13-Apr-2011 22:10

my registrations are timing out. I had tried another router as I was getting no auth before, but that piece of junk had no DMZ that I could find, so I expect that there was loads of registrations go out and not work so will wait till they timeout.

Need to get slingshot to get onto telecom about my low sync speeds tomorrow since its clearly not router issue as they claimed last time

Richard rich.ms

nate

I'm @nate
6287 posts

Uber Geek
+1 received by user: 373

Moderator

Trusted

Subscriber

Reply # 458477 13-Apr-2011 22:34

mthand: 2talk live portal is not working for me either, but I can still receive calls

+1

Vodafone naked dsl here.

Custom software development | Mt Eden Cafe | Cafe Owner

wanghou168

451 posts

Ultimate Geek
+1 received by user: 10

Reply # 458487 13-Apr-2011 22:50

2talk sip phone is working for me
using linksys spa942 ip phone with slingshot here

Cheapest Online Bookstore Free Worldwide Delivery

http://www.bookdepository.com/?a_aid=lhou021

MOBILE: Nexus 6, Huawei P8 & Moto X Pure Edition
TABLET: Asus VivoTab Windows 10
OTHER: Asus Vivobook Laptop + Intel NUC5i3 Desktop + A family of Raspberry Pi x 9 + Amazon Echo

richms

20026 posts

Uber Geek
+1 received by user: 3703

Trusted

Subscriber

Reply # 458503 13-Apr-2011 23:21

Something whackys going on, the only incoming on sip that tcpdump shows is from my overseas provider that is registering and working fine, and those random doorknockers that fail2ban deals with.

No idea why its not working, I can see the stuff go out to 2talk and italk, nothing comes back from them, they have not ended up in the fail2ban chain, I can ping 2talk.co.nz and italk.co.nz.

Am about to try the details in the old sipura 9000 tomorrow and see what that does, but this is just weird. I have my static in there with externip in sip.conf at the top, and it has always worked in the past till these last few days where first italk died, now 2talk, not too sure how to look at the actual sip stuff going out, but I would expect to see something if the auth is not suddenly wrong or something.

Richard rich.ms

richms

20026 posts

Uber Geek
+1 received by user: 3703

Trusted

Subscriber

Reply # 458509 14-Apr-2011 00:07

Well thats weird, did a router firmware upgrade and it sorted it on the DG834Gv4. will have to try the backup router again later but its working for now. the new one added an option to disable the SIP ALG which I tried. and then stuff registred. Not sure if its a conincidence so will leave it and see. Worked forever (9 months at least) on the router with the old firmware without that option to tick so I dont see what it could be here that's changed.

Richard rich.ms

old3eyes

7524 posts

Uber Geek
+1 received by user: 703

Subscriber

Reply # 458545 14-Apr-2011 08:47

I notice that 2Talks discussion forum vanished about a month ago.. Guess they didn't like people talking about them and their bad tech support..

Regards,

Old3eyes

jjnz1

1029 posts

Uber Geek
+1 received by user: 64

Subscriber

Reply # 458565 14-Apr-2011 09:36

Same problem for me yesterday around midday...
I changed the sip port from 5060 to 5061 and it has worked since. I wonder what it could be?

[EDIT] On my PAP2T log, it showed an error when logging into 2Talk servers. -It couldn't find them.

cisconz

cisconz
1161 posts

Uber Geek
+1 received by user: 76

Trusted

Subscriber

Reply # 458569 14-Apr-2011 09:53

richms: Well thats weird, did a router firmware upgrade and it sorted it on the DG834Gv4. will have to try the backup router again later but its working for now. the new one added an option to disable the SIP ALG which I tried. and then stuff registred. Not sure if its a conincidence so will leave it and see. Worked forever (9 months at least) on the router with the old firmware without that option to tick so I dont see what it could be here that's changed.

They have increased their IP pool I think as I used to only get IP's ending in .16x now I get .18x also.
Also I note that when you register the incoming calls can come from multiple IP's, I register to .163 but get incoming calls from .160,.182,.163 etc.

To solve it on my phone I needed to enable DNS SRV

Hmmmm