Connecting a WD MyBook Live (Ethernet-only) hard drive to Windows 8 PC

Forums › Microsoft Windows › Connecting a WD MyBook Live (Ethernet-only) hard drive to Windows 8 PC

heavenlywild

5061 posts

Uber Geek

Trusted

#113103 6-Jan-2013 16:21

So I have a wireless MyBook Live drive and want to connect it to my Windows 8 PC directly. I was told to grab a crossover ethernet cable. However, the PC doesn't seem to recognise the drive.

Anyone have any other ideas?

semigeek

1606 posts

Uber Geek

#740699 6-Jan-2013 16:46

I'm only guessing here, but does it need a firmware update if that's at all possible?
Or a Windows 8 driver install if available?

heavenlywild

5061 posts

Uber Geek

Trusted

#740708 6-Jan-2013 17:51

Good idea, I have just checked and I have the latest drivers.

cyril7

9058 posts

Uber Geek

ID Verified

Trusted

Subscriber

#740711 6-Jan-2013 18:07

Hi, my guess is that without a DHCP server in the network its going to fail.

Cyril

joutei

308 posts

Ultimate Geek

#740712 6-Jan-2013 18:07

heavenlywild: Good idea, I have just checked and I have the latest drivers.

I would think you wouldn't need a crossover cable since most motherboards should be now auto-mdix.

Anyway you might need network software from WDs website

muzzIT

16 posts

Geek

#743421 11-Jan-2013 17:04

Usually you plug the hard drive into your router and use the routers assigned IP address to access the built in web management software.

That is how I setup my WD Mybook world edition a few years back.

dukester

475 posts

Ultimate Geek

ID Verified

Lifetime subscriber

#743468 11-Jan-2013 18:29

I have just setup a mybook live duo on my windows 8 system. I just plugged it in to my router via the supplied network cable, let it do an update, setup the folders I wanted backedup and away it went. Its a great little nas box.