MozyPro through IPCOP?

Forums › Linux › MozyPro through IPCOP?

Zigg

437 posts

Ultimate Geek
+1 received by user: 307

#65033 28-Jul-2010 08:58

Anyone using MozyPro through an Ipcop box or similar? The ipcop firewall is blocking it from working. Mozy uses port 443/TCP. I DMZ'd the PC's ip but still no luck. Any suggestions?

michaelmurfy

meow
13580 posts

Uber Geek
+1 received by user: 10911

Moderator

ID Verified

Trusted

Lifetime subscriber

#357855 28-Jul-2010 17:38

What's your config? Like, is there just a standard ADSL modem on one ethernet interface then IPcop in the middle of that to your network?

If so, make sure your IPcop firewall is getting forwarded everything to it, either set it in a DMZ with your Modem (on the modems interface) or put the modem into Half Bridge mode.

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

Zigg

437 posts

Ultimate Geek
+1 received by user: 307

#357967 28-Jul-2010 21:23

"Standard ADSL modem on one ethernet interface then IPcop in the middle of that to your network."

I will check it out tomorrow, but it backed up today so Mozy may have had issues when I installed it yesterday. Will check the modem settings while I'm there.
Thanks :-)