Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


duckDecoy

948 posts

Ultimate Geek
+1 received by user: 432

Subscriber

#302599 5-Dec-2022 11:50
Send private message

Looking for recommendations for medical tape adhesive remover.   I tried a packet of wipes from the chemist but they didn't seem to work that well, I wondered if some brands are better than others.   Maybe there's a liquid and I can use it with cotton wool or something.

 

I need to remove my tape, clean up the residue and then reapply tape, so it has to not irritate skin or leave any residue etc.


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
MikeAqua
8203 posts

Uber Geek
+1 received by user: 3957


  #3005905 5-Dec-2022 11:51
Send private message

Surgical meths, as long as there aren't open wounds.





Mike




Eva888
2868 posts

Uber Geek
+1 received by user: 2524

Lifetime subscriber

  #3005906 5-Dec-2022 11:55
Send private message

Eucalyptus oil to remove the sticky then a soapy wipe to remove the oil residue. Works well for chewing gum too.

pih

pih
670 posts

Ultimate Geek
+1 received by user: 359

Lifetime subscriber

  #3005922 5-Dec-2022 12:41
Send private message

De-Solv-It sticky spot and stain remover. Works wonders on all things sticky, but it is pretty expensive. Various oils work well too, as another poster suggests.



duckDecoy

948 posts

Ultimate Geek
+1 received by user: 432

Subscriber

  #3005971 5-Dec-2022 12:53
Send private message

Oil is probably out for me as the purpose of the tape is to help keep a medical device stuck down, the device is stuck to my arm but to ensure it stays put I put additional tape over it.  I don't want any possibility of getting oil or soap onto the medical device sticky pad as that may loosen it.


tieke
688 posts

Ultimate Geek
+1 received by user: 258

ID Verified

  #3006003 5-Dec-2022 14:14
Send private message

You used to be able to get bottles of Uni-Solve Adhesive Remover, which worked extremely well, but I wasa going to give a purchase link but can only currently see it for sale as wipes, which is a format I haven't tried so can't unequivocally recommend.

 

I have previously been told to spray Flixonase on your skin before you tape if you have adhesive allergies and that it also helps with rashes from adhesive, so I thought I'd mention it in case you were having those issues.


djtOtago
1190 posts

Uber Geek
+1 received by user: 613


  #3006032 5-Dec-2022 15:39
Send private message

I've found "Remove" Adhesive remover to be quite good. Some chemists sell them individually or in boxes of 5 or 50.

 

Remove Adhesive Remover Wipes – Discount Chemist


 
 
 

Want to support Geekzone and browse the site without the ads? Subscribe to Geekzone now (monthly, annual and lifetime options).
tieke
688 posts

Ultimate Geek
+1 received by user: 258

ID Verified

  #3006034 5-Dec-2022 15:47
Send private message

djtOtago:

 

I've found "Remove" Adhesive remover to be quite good. Some chemists sell them individually or in boxes of 5 or 50.

 

Remove Adhesive Remover Wipes – Discount Chemist

 

 

That'll be the stuff - Smith & Nephew are the ones who make Uni-Solve Adhesive Remover, so Remove must be their Australasian branding.


farcus
1644 posts

Uber Geek
+1 received by user: 449


  #3006040 5-Dec-2022 16:12
Send private message

duckDecoy:

 

Oil is probably out for me as the purpose of the tape is to help keep a medical device stuck down, the device is stuck to my arm but to ensure it stays put I put additional tape over it.  I don't want any possibility of getting oil or soap onto the medical device sticky pad as that may loosen it.

 

 

 

 

I use a Dexcom G6 (CGM) on my upper arm.
Before sticking the sensor in place I prep my arm with skin prep
Have never needed to use an over-patch to keep in place. Then at the end of the wearable period I pull the sensor off in the shower and wash with body wash. On the odd occasion there is a little bit of adhesive left behind that I remove with baby oil.


panther2
389 posts

Ultimate Geek
+1 received by user: 145


  #3006044 5-Dec-2022 16:18
Send private message

This is what hospitals use


https://www.capesmedical.co.nz/medical-products/woundcare/adhesive-remover/reynard-adhesive-remover-wipes-8p5cm-4p5cm/reynard-adhesive-remover-wipes-8p5cm-4p5cm?gclid=CjwKCAiAp7GcBhA0EiwA9U0mtgXCZhBy39TiOkNJmJbTbshiCBTBBRXXD3QIsuQ8x2oK6cBPheimXRoCj3IQAvD_BwE

duckDecoy

948 posts

Ultimate Geek
+1 received by user: 432

Subscriber

  #3006078 5-Dec-2022 18:21
Send private message

farcus:

 

duckDecoy:

 

Oil is probably out for me as the purpose of the tape is to help keep a medical device stuck down, the device is stuck to my arm but to ensure it stays put I put additional tape over it.  I don't want any possibility of getting oil or soap onto the medical device sticky pad as that may loosen it.

 

 

 

 

I use a Dexcom G6 (CGM) on my upper arm.
Before sticking the sensor in place I prep my arm with skin prep
Have never needed to use an over-patch to keep in place. Then at the end of the wearable period I pull the sensor off in the shower and wash with body wash. On the odd occasion there is a little bit of adhesive left behind that I remove with baby oil.

 

 

Im using a Freestyle Libre CGM.  This is very interesting information for me as I am new to it (only on my 5th).  I have used Skin-Glu twice, and both times the CGM was unstuck and dangling within a few hours.  The first I lost, the 2nd time it happened I put a patch over and managed to rescue it.   Ive stopped using Skin-Glu and preemptively applied patches for the remainder I have had because at $100 a pop I cannot afford to drop them.

 

Have you had luck NOT using a tack prep and just relied on the product's stickyness?  Or do you recommend always using it.  I might switch to your product rather than Skin-Glu


shrub
793 posts

Ultimate Geek
+1 received by user: 276

ID Verified

  #3006080 5-Dec-2022 18:24
Send private message

Coconut oil

 
 
 
 

Shop now on Samsung phones, tablets, TVs and more (affiliate link).
farcus
1644 posts

Uber Geek
+1 received by user: 449


  #3006100 5-Dec-2022 20:48
Send private message

duckDecoy:

 

Im using a Freestyle Libre CGM.  This is very interesting information for me as I am new to it (only on my 5th).  I have used Skin-Glu twice, and both times the CGM was unstuck and dangling within a few hours.  The first I lost, the 2nd time it happened I put a patch over and managed to rescue it.   Ive stopped using Skin-Glu and preemptively applied patches for the remainder I have had because at $100 a pop I cannot afford to drop them.

 

Have you had luck NOT using a tack prep and just relied on the product's stickyness?  Or do you recommend always using it.  I might switch to your product rather than Skin-Glu

 

 

used to use the libre with a miaomiao attached to the top of it and never lost one. 
perpetration is key. Apply directly after showering (and make sure to shave the area of application before applying).
I don't use anything special to keep the G6 attached (other than skin prep) - but when using the Libre / Miaomiao I used to use Kinesiology Tape over the top.
if Abbot ever get around to releasing Libre 3 in NZ I don't think you would ever need this though as it has a much smaller profile..
Dexcom G7 is available in NZ now and has a similar small profile to the Libre 3.


duckDecoy

948 posts

Ultimate Geek
+1 received by user: 432

Subscriber

  #3006114 5-Dec-2022 21:51
Send private message

farcus:

 

I don't use anything special to keep the G6 attached (other than skin prep) - but when using the Libre / Miaomiao I used to use Kinesiology Tape over the top.

 

Would that last the 14 days, or would you replace the K-Tape?  And if so, did you put a barrier over the Miaomiao to prevent the K-Tape sticking to it?

 

I have been looking at various products similar to the Miaomiao, was there a reason you liked this in particular?  I have not gone for any of them yet until I get a handle on attaching the Libre properly, as Abbot wont warranty it falling off if anything else was attached.

 

Lots of questions sorry, its basically been the only update to my various diabetic bits and pieces that's been a life changer so I'm keen to get it dialed in.


Geektastic
18021 posts

Uber Geek
+1 received by user: 8480

Trusted
Lifetime subscriber

  #3006216 6-Dec-2022 12:06
Send private message

No idea if it’s still made or indeed sold in NZ but there was a product called Zoff that was specifically for this when I was a child. It’s specifically for the removal of medical tape adhesive.





ratsun81
517 posts

Ultimate Geek
+1 received by user: 183


  #3006350 6-Dec-2022 14:58
Send private message

duckDecoy:

 

Im using a Freestyle Libre CGM.  This is very interesting information for me as I am new to it (only on my 5th).  I have used Skin-Glu twice, and both times the CGM was unstuck and dangling within a few hours.  The first I lost, the 2nd time it happened I put a patch over and managed to rescue it.   Ive stopped using Skin-Glu and preemptively applied patches for the remainder I have had because at $100 a pop I cannot afford to drop them.

 

Have you had luck NOT using a tack prep and just relied on the product's stickyness?  Or do you recommend always using it.  I might switch to your product rather than Skin-Glu

 

 

I used the freestyle libre for a few years. I found they can be hit and miss, some stuck no problem others did exactly what you describe here and some separated above the medical tape.

 

Id suggest you contact mediray and describe your issues, they will send out replacements in some cases.

 

A few pointers from my experience.

 

If your arms are narrow like mine try the sensor on your flank near your kidneys. Doing this can cause some inaccuracy, however with the appropriate app you can calibrate.... I used an app called glimp on android.
Smith and Nephew make a product called skin prep which is just like skin glu. Perhaps try this.

 

Other things that i found helpful.

 

Dont put a sensor on for at least 1 hour after a shower.
Ensuring the site is hair free can assist with sticking.

 

Cleaning the site with alcohol prep and letting it dry is very important, if you feel the need to use an extra adhesive then play around with how long it takes to dry and get tacky.

 

If you are a naturally sweaty person or workout regularly then the only real answer is to use overpatches.

 

As for getting the sensor off, use the Smith and Nephew remove. Can be found locally or get on Amazon.

 

 


 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.