Internet Speeds always been slow + Line Stats

Forums › New Zealand Broadband › Internet Speeds always been slow + Line Stats

1 | 2

krishneil

24 posts

Geek

#1033513 29-Apr-2014 21:50

TimA: Where on this map are you?

around 520 - 560 redoubt road, sorry i don't want to give away exact address

Coil

6614 posts

Uber Geek
+1 received by user: 2153
Inactive user

#1033515 29-Apr-2014 21:54

Your feed off MKY/AH, Roughly 1-2KM away, (Copper distance) expected sync rate is above 5Mbp/s as the layer suggests. ADSL2+ enabled..

krishneil

24 posts

Geek

#1033516 29-Apr-2014 21:56

TimA:
krishneil: Thank you all for your help

I will go ahead with the master filter option within the next 1-6 months :P

I would suspect to see that the jack points vary if its an internal wiring issue. Speak with our helpdesk and log a fault. At the end of the day we dont want an uphappy customer or a bad impression of our service.

I get 0.4mbs per second from both 2 ports which drop connection when call comes through
I will try do another test tomorow during the day to verify since i havnt tested the 2 ports since last week
How can i contact your helpdesk?

johnr

19282 posts

Uber Geek
+1 received by user: 2526
Inactive user

#1033518 29-Apr-2014 21:56

5 Mbp/s if you have good house wiring, If your internet connection drops when a phone call is made in or out then yes more proof of poor house / wiring,

Did you review the blog post I linked you off to done by Steve Biddle?

krishneil

24 posts

Geek

#1033524 29-Apr-2014 22:04

btw what website are you using to see the cabinet map Tima ?
on your map i think it shows im connected to cabinet 1.7km away from me, therefore my friend who is 150m away from the other cabinet is clearly getting higher speeds than me.

is it possible for me to get connected onto another cabinet because i would rather be on the closer one tbh.

johnr

19282 posts

Uber Geek
+1 received by user: 2526
Inactive user

#1033527 29-Apr-2014 22:06

No you can't change cabinets and the copper cable does not always run direct to the cabinet / exchange,

You just want to get the house wiring issues sorted for a start

Dell

Shop now for Dell laptops and other devices (affiliate link).

krishneil

24 posts

Geek

#1033530 29-Apr-2014 22:09

johnr: No you can't change cabinets and the copper cable does not always run direct to the cabinet / exchange,

You just want to get the house wiring issues sorted for a start

i've read that article before. It says that no matter how bad my house wiring is, they can install a master filter dedicated to adsl. if thats the case, i will get this done soon

thanks for that

johnr

19282 posts

Uber Geek
+1 received by user: 2526
Inactive user

#1033537 29-Apr-2014 22:13

Yes get a dedicated xDSL jack point sorted out, This is the best thing you could do to help,

Once this is done don't forget to remove all the line filters you have

1 | 2