just had a bit of decrease in speed , unsure why this is , ive checked all my connections and they look okay
heres my stats , and you can see my eariler post on the previous page of the better sync rates i was getting
|
|
just had a bit of decrease in speed , unsure why this is , ive checked all my connections and they look okay
heres my stats , and you can see my eariler post on the previous page of the better sync rates i was getting
Trusted
Trusted
EDIT: Oops, quoted wrong post!
Jase2985:
@samF doubt you will see more as you are likely on a ikanos line card and you are maxing that out. they do report they can obtain higher speeds but they are stuck at 70/30.
the newer boardcom cards can do 100/50
Of course you are right, I forgot about that limit! Interestingly I had another resync yesterday and now the attainable speed is even better! Errors are static now which is good, so just waiting for that interleaving to drop...
Now who do I have to bribe / blackmail / kill to get my cabinet upgrade to better line cards!? :D
ID Verified Trusted
Lizard Networks Subscriber
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
Trusted
ID Verified Trusted Lizard Networks Subscriber
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
Trusted
ID Verified Trusted Lizard Networks Subscriber
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
Trusted
Trusted Lifetime subscriber
ID Verified Lifetime subscriber
Trusted
Lifetime subscriber
Trusted
Seen a big leap in speed after latest Fritz firmware on my VDSL line. Was getting 12-14Mbs down and 3-4Mbs up for the last year or so. Am now consistently getting 20Mbs down, and 5-6Mbs up. Went from Fritz firmware version 6.53 to 6.83 on a Fritzbox 7390. I perceive the line has been more stable too, although that is always weather related on this line (wind and rain causes re-syncs), so it will take longer to be sure on that!
Change after firmware update was immediate in the speed gain (synced higher after firmware reboot) and I'm aware of no other changes. (Of course, it could be a fluke related to an unknown network change, and is unrelated to my firmware update.... but seems unlikely given timing!)
I'm on Ikanos 2.1 linecard (although annoyingly this Fritz firmware 6.83 gives less info on the linecard than the previous 6.53 version did).
I'm only about 150m from Cabinet, but the lines are in terrible condition up here. Chorus tech said if he got his way, he wouldn't allow our street to have VDSL as the lines are too poor quality (he'd roll us alll back to ADSL if he could!).... which makes it all the more frustrating that Fibre isn't coming until July 2019!
miked:
Seen a big leap in speed after latest Fritz firmware on my VDSL line. Was getting 12-14Mbs down and 3-4Mbs up for the last year or so. Am now consistently getting 20Mbs down, and 5-6Mbs up. Went from Fritz firmware version 6.53 to 6.83 on a Fritzbox 7390. I perceive the line has been more stable too, although that is always weather related on this line (wind and rain causes re-syncs), so it will take longer to be sure on that!
Change after firmware update was immediate in the speed gain (synced higher after firmware reboot) and I'm aware of no other changes. (Of course, it could be a fluke related to an unknown network change, and is unrelated to my firmware update.... but seems unlikely given timing!)
I'm on Ikanos 2.1 linecard (although annoyingly this Fritz firmware 6.83 gives less info on the linecard than the previous 6.53 version did).
I'm only about 150m from Cabinet, but the lines are in terrible condition up here. Chorus tech said if he got his way, he wouldn't allow our street to have VDSL as the lines are too poor quality (he'd roll us alll back to ADSL if he could!).... which makes it all the more frustrating that Fibre isn't coming until July 2019!
Hmmmm. 150m from cabinet. That is is a very short distance and you should be getting 60 - 70 MBps Sync at least with a decent line. You did say the line is bad so that is the constraint. I guess no one want to invest in copper any more given that fibre is coming. Your modem stats is interesting though. Line attenuation of 11db would corroborate with your short distance to the cabinet and yet it would not sync higher than 20 Mbps. Must be due to interference, noise ..etc.
Can you get wireless broandband as that is a viable alternative if you can live with a data cap.
|
|
|
