0.78K from VDSL Cab what should I expect?

Forums › New Zealand Broadband › 0.78K from VDSL Cab what should I expect?

1 | 2 | 3 | 4

47 posts

Geek

#861753 18-Jul-2013 17:14

Here's the weird thing, almost 24 hours since it went off its back on again on Telecom, so maybe it was a line fault and the person I spoke to around 9 last night at Telecom needs an attitude adjustment as it was an actual equipment fault and not a porting issue. (Also thanks to anyone on here who may have pulled any behind the scenes strings!)
Ah well will enjoy it while it lasts as its service moving time tomorrow afternoon.
As a reference I got sync of 15.5-15.8 with my Draytek 120 and now have 14959/1048 with the Fritzbox 7390. Also needed to factory reset it before it would work.

Batman

Mad Scientist
29761 posts

Uber Geek

Trusted

Lifetime subscriber

#861816 18-Jul-2013 19:23

you know I am in exactly the same situation (around 750m from exchange). am told by chorus tech attenuation too high. so if I install the master filter that could improve my chances of VDSL?

sheppy

47 posts

Geek

#861817 18-Jul-2013 19:26

Installing a master splitter will improve ADSL2 as well as VDSL so worth doing anyhow.
Wait 24 hours and I will be able to tell you whether I can get VDSL

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#861825 18-Jul-2013 20:00

joker97: you know I am in exactly the same situation (around 750m from exchange). am told by chorus tech attenuation too high. so if I install the master filter that could improve my chances of VDSL?

Unlikely as if youy had a manual prequal with a tech visiting they would have measured the sync rate or attenuation at the street. If it was too low there it's not going to be any better with a master filter.

Batman

Mad Scientist
29761 posts

Uber Geek

Trusted

Lifetime subscriber

#861855 18-Jul-2013 21:04

ok thanks :D

Batman

Mad Scientist
29761 posts

Uber Geek

Trusted

Lifetime subscriber

#861861 18-Jul-2013 21:12

actually I meant :( but thanks for clarifying! I can switch off that last bit of hope and move my brain onto other things :D

sheppy

47 posts

Geek

#862301 19-Jul-2013 18:05

Just had it installed, master splitter in the box outside, cat5 taking both signals for a further metre then split into cat5 for modem and ordinary phone cable for phone.
Sync rate so far 27976 down, 10352 up, attenuation down 15, 102 up, s/n down 12 up 16.
Speedtest 26.1bps down, 9.43 up, latency 6ms

I know it's early days but I'm very happy with those numbers!

And Telecom BB stayed active until the engineer called up for the switchover

Wise

Send money globally for less with Wise - one free transfer up to NZ$900 (affiliate link).

webwat

2036 posts

Uber Geek

Trusted

#862677 20-Jul-2013 17:55

HowickDota: I was syncing at 16mbit on ADSL2+ with 12db snr 10db attenuation and I'm getting 40mbit also with 12db snr on VDSL 11db attenuation

So I must be wrong about the distance where VDSL2 slows down to ADSL speeds. However if that filter is hard wired into your line (not the plugin type) then you have the best chance.

Time to find a new industry!

sheppy

47 posts

Geek

#862693 20-Jul-2013 18:46

The tech suggested 20meg @ 1km was what he'd been told but I think it was his first install

coffeebaron

6231 posts

Uber Geek

Trusted

Lifetime subscriber

#862727 20-Jul-2013 19:56

webwat:
HowickDota: I was syncing at 16mbit on ADSL2+ with 12db snr 10db attenuation and I'm getting 40mbit also with 12db snr on VDSL 11db attenuation

So I must be wrong about the distance where VDSL2 slows down to ADSL speeds. However if that filter is hard wired into your line (not the plugin type) then you have the best chance.

It's about 1.6km, and I can confirm that as it is how far I am from exchange (via cable, not road) and syncing virtually same speed as was my ADSL2+ speeds.

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

sheppy

47 posts

Geek

#867312 28-Jul-2013 10:59

Update, 8 days out from install and it resync'd, speed is slightly down and latency more than doubled.
Speedtest results now 25.96/8.52 43ms
Before 25.98/9.37 7ms
Stats from Fritzbox:
Current throughput kbit/s 27888 10352
Latency 8 ms 8 ms
Bitswap off off
Impulse Noise Protection 0.8 0.8

Signal-to-noise ratio dB 12 17
Line attenuation dB 15 102
Carrier record A43 A43
Profile 8b

tgzerozone

68 posts

Master Geek

#867910 29-Jul-2013 15:15

sheppy: Update, 8 days out from install and it resync'd, speed is slightly down and latency more than doubled.
Speedtest results now 25.96/8.52 43ms
Before 25.98/9.37 7ms
Stats from Fritzbox:
Current throughput kbit/s 27888 10352
Latency 8 ms 8 ms
Bitswap off off
Impulse Noise Protection 0.8 0.8

Signal-to-noise ratio dB 12 17
Line attenuation dB 15 102
Carrier record A43 A43
Profile 8b

What international speedtest figures do you get?

sheppy

47 posts

Geek

#867911 29-Jul-2013 15:16

Any particular server / location?

tgzerozone

68 posts

Master Geek

#867912 29-Jul-2013 15:18

sheppy: Any particular server / location?

Hmm, maybe LA or San Francisco?

Batman

Mad Scientist
29761 posts

Uber Geek

Trusted

Lifetime subscriber

#869650 31-Jul-2013 23:47

coffeebaron:
It's about 1.6km, and I can confirm that as it is how far I am from exchange (via cable, not road) and syncing virtually same speed as was my ADSL2+ speeds.

how did you manage to get VDSL from that far out?
also how do i know how far i am from the exchange? from the maps i am around 700m from an exchange across the road but from the chorus manual test my attenuation is so high i can't be only 700m?

1 | 2 | 3 | 4