DarkShadow:watsonash: now that I believe the 998 rollout is complete, is there any news about extending the range of VDSL viable areas (particularly as the wholesale cost of the copper connections is increasing by about $3 - which is kind of ironic when I can't get hold of fibre until end of 2019)?
We're watching this and will switch you over as soon as it is available.
for what its worth, I'm happy to be a guinea pig - there is a whole chunk of Torbay on the Auckland North shore which is ADSL only without access to fibre until mid to late 2019 and we aren't exactly in the sticks out here;
My BigPipe ref on this was; "ref:_00D90oVYy._50090uEmGJ:ref"
My stats via the ssh interface are below.
I'm running a Draytek 130 in bridge mode to a Ubiquity ER-Lite. I've a pretty deep IT software and infrastructure background so think I would make a reasonable test case.
[code]
adsl status
--------------------------- ATU-R Info (hw: annex A, f/w: annex X) -----------
Running Mode : ADSL2+ Annex A State : SHOWTIME
DS Actual Rate : 13716000 bps US Actual Rate : 1112000 bps
DS Attainable Rate : 13448000 bps US Attainable Rate : 278 bps
DS Path Mode : Fast US Path Mode : Fast
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 27 dB Cur SNR Margin : 11 dB
DS actual PSD : 19. 4 dB US actual PSD : 12. 5 dB
NE Rcvd Cells : 1566646764 NE Xmitted Cells : 62487014
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
ADSL Firmware Version : 05-04-04-04-00-01
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 13 dB Far SNR Margin : 12 dB
CO ITU Version[0] : b500494b CO ITU Version[1] : 4e530001
DSLAM CHIPSET VENDOR : < IKNS >
>
Idle timeout. Bye-Bye
[/code]