VDSL Performance & Tuning

Forums › New Zealand Broadband › VDSL Performance & Tuning

1 | ... | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | ... | 285

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824353 23-May-2013 19:40

JamesL: Ok, so I'm guessing its being misreported then

seems to list starts per band.. so that could be why it looks odd..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

SamF

1578 posts

Uber Geek

Trusted

#824358 23-May-2013 19:47

@JamesL: Well, unless I'm mistaken, your attenuation is 2.9db!! How far from the cabinet are you?

@hio77: Huh, weird, where did that go to!? In any case my comment was 'Sweet! I'm happy to beta test when you're ready!' :D

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824360 23-May-2013 19:50

SamF: @JamesL: Well, unless I'm mistaken, your attenuation is 2.9db!! How far from the cabinet are you?

@hio77: Huh, weird, where did that go to!? In any case my comment was 'Sweet! I'm happy to beta test when you're ready!' :D

2.9 was what i first read, but then if i recall right, his adsl stats were higher.. and if that isnt the case, sync rates seem well below par..

ah! now theres context to the blank post ;)

the thing im weary of, is if the 7340 is different to the 7390..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

JamesL

956 posts

Ultimate Geek
Inactive user

#824363 23-May-2013 19:56

Definitely won't be 2db as I had 9db on ADSL2+, at a guess I thought I'd be on ~12db as I'm about 500m from the cabinet

I'd say that it's misreporting

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824365 23-May-2013 20:03

JamesL: Definitely won't be 2db as I had 9db on ADSL2+, at a guess I thought I'd be on ~12db as I'm about 500m from the cabinet

I'd say that it's misreporting

ah, so my memory did serve me right.. with an original of 9db, it doesn't seem likely that any of the values there are mildly correct..

only other difference i can see, is if you had different modems, and they detect attention slightly difference but it cant have changed too much between the two..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

sidefx

3712 posts

Uber Geek

Trusted

#824367 23-May-2013 20:05

Yeah that sounds about right and about matches your sync rate I think. My adsl was 9db on one modem and 10 on another, now 12 on VDSL. I'm about 600M from cabinet so sounds pretty similar to my line. I guess some misreporting on the zyxel, is firmware up to date?

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

JamesL

956 posts

Ultimate Geek
Inactive user

#824368 23-May-2013 20:06

I'll be switching to the fritz at the end of next month, now that I'm on I don't want to touch the modem so DLM doesn't ruin my day

Sharesies

Trade NZ and US shares and funds with Sharesies (affiliate link).

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824370 23-May-2013 20:08

JamesL: I'll be switching to the fritz at the end of next month, now that I'm on I don't want to touch the modem so DLM doesn't ruin my day

be sure to stick to the powered down for 5 mins trick.. seems to put DLM back into its position..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

JamesL

956 posts

Ultimate Geek
Inactive user

#824371 23-May-2013 20:08

Noted thanks :) I should read the first page again now that I actually have VDSL2

sidefx

3712 posts

Uber Geek

Trusted

#824384 23-May-2013 20:22

Must admit I don't usually power down for long these days, usually just 20 seconds or so. But I do ensure the incoming line is disconnected completely from the modem for a good 10 minutes or so while restoring fritzbox settings, then do a quick power down, login to web interface and make sure everything looks ok, and only then reconnect the incoming line back to the modem.

(BTW, I just used that process to change back to a less aggressive SNR tweak; was a bit worried I might find it came back up on DLM2 since it's been over 12 CRCPM today, over 11 yesterday I think and pretty close to 10 for a number of days. But it came back up still DLM1, so all good.)

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

javadub

5 posts

Wannabe Geek

#824399 23-May-2013 20:36

looking good on 17a

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824400 23-May-2013 20:38

javadub:
looking good on 17a

looks perfect ;)

sidefx: Must admit I don't usually power down for long these days, usually just 20 seconds or so. But I do ensure the incoming line is disconnected completely from the modem for a good 10 minutes or so while restoring fritzbox settings, then do a quick power down, login to web interface and make sure everything looks ok, and only then reconnect the incoming line back to the modem.

(BTW, I just used that process to change back to a less aggressive SNR tweak; was a bit worried I might find it came back up on DLM2 since it's been over 12 CRCPM today, over 11 yesterday I think and pretty close to 10 for a number of days. But it came back up still DLM1, so all good.)

could be something to be said for older lines..

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

SamF

1578 posts

Uber Geek

Trusted

#824433 23-May-2013 21:23

hio77:ah! now theres context to the blank post ;)

the thing im weary of, is if the 7340 is different to the 7390..

Well I'm running a 7340 so am happy to try it on mine if you need a guinea pig.

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#824445 23-May-2013 21:59

SamF:
hio77:ah! now theres context to the blank post ;)

the thing im weary of, is if the 7340 is different to the 7390..

Well I'm running a 7340 so am happy to try it on mine if you need a guinea pig.

ill probably post a little test for ya tonight along with some extra information capturing just encase its missing anything (raw static files)...

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

SamF

1578 posts

Uber Geek

Trusted

#824448 23-May-2013 22:02

Sweet, I'm keen!

1 | ... | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | ... | 285