Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


2190 posts

Uber Geek
+1 received by user: 664

Subscriber

Topic # 151207 17-Aug-2014 20:11
Send private message

Parents are in the process of building a new house. We have contacted Vodafone, as that is their current provider, to arrange install of a new landline  to a new house they are in the process of building. Vodafone are telling us the price is $45 per meter, for cable and trunking, dig your own trench plus an hourly labour cost. 

I was of the opinion that it does sound a bit pricy for cable/trunking. Electrician and builder are telling us that the per meter cost sounds a bit extreme. 

Has anyone had a new line put in as of late, if so can you advise the cost. The run to the box is around 10M I would guess. 

They are building in Wardronville Dunedin which looks like it isn't getting UFB at all. 

Thanks

Create new topic
305 posts

Ultimate Geek
+1 received by user: 66


  Reply # 1110132 17-Aug-2014 21:25
Send private message

Usually its done at the same tome powers put in as its in the same trench - sparkie ahould b able to aupply the conduit and telecom cabling

181 posts

Master Geek
+1 received by user: 22

Subscriber

  Reply # 1110176 17-Aug-2014 22:16
Send private message

Friends out here (Marlborough Sounds) were quoted $100/m to run a landline to their new house. They went with VF Home Phone Wireless instead.

4040 posts

Uber Geek
+1 received by user: 867


  Reply # 1110184 17-Aug-2014 22:29
Send private message

Is this in a built-up/urban area, or somewhere rural? The rate can differ depending on where the line is being installed.

Edit: do you mean Waldronville?



2190 posts

Uber Geek
+1 received by user: 664

Subscriber

  Reply # 1110190 17-Aug-2014 22:38
Send private message

Correct, Waldronville. I would class it as urban. Urban enough to have VDSL, but not urban enough for UFB anyway..

1917 posts

Uber Geek
+1 received by user: 110


  Reply # 1110231 18-Aug-2014 07:19

Its not really that much, if you think its too expensive why not dig your own conduit?

163 posts

Master Geek
+1 received by user: 1


  Reply # 1110777 18-Aug-2014 20:01
Send private message

It does sound expensive if they are charging additional for labour and aren't digging anything.

The cost of twisted pair underground cable is around $1 a meter
The cost of ducting around $5 a meter
The cost of plastic warning tape for a buried underground cable I'd estimate to be cheaper than the cable.

So at less than $7 a meter, their markup is quite a bit.

If that included labour and callout for a short run cable lay however, their pricing if inclusive seems quite reasonable.

14216 posts

Uber Geek
+1 received by user: 2572

Trusted
Subscriber

  Reply # 1110819 18-Aug-2014 20:58
Send private message

People are expensive, including installers and the people who organise everything. Does seem a bit steep though.




AWS Certified Solution Architect Professional, Sysop Administrator Associate, and Developer Associate
TOGAF certified enterprise architect
Professional photographer


3621 posts

Uber Geek
+1 received by user: 1343

Subscriber

  Reply # 1110886 18-Aug-2014 22:36
Send private message

I am fairly certain service leads are still flat rate - around $100. The meter charges only apply to rural service leads longer than 60m.

I find Telecom are the best provider for customers to talk to about arranging this. The others just don't really seem to be able to figure it out - who knows why.


1917 posts

Uber Geek
+1 received by user: 110


  Reply # 1110906 18-Aug-2014 23:31

Think about the fees.

Call out charge - petrol/wear and tear on van.
Time - 2 people @ $70-$80/hr
Margins - @ $10-$15/hr

Lets say the avg house takes 6 hours to hook up. These costs can get big very quick.

1665 posts

Uber Geek
+1 received by user: 182

Subscriber

  Reply # 1110980 19-Aug-2014 07:11
Send private message

Get your sparky to source the conduit, dig and install plus put in two draw wires. Make sure the ETP is in a good place and try not to have lots of bends.   

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.