Simple answer - No.

Long answer - you're too far from the serving exchange / cabinet to allow for DLM1.

your looking at the INP and the delay values to be able to work out DLM

DLM-1     1ms  0INP

DLM-2     8ms  0INP
DLM-4     8ms  1INP *9
DLM-6     8ms  2INP

DLM-3   16ms  0INP
DLM-5   16ms  1INP
DLM-7   16ms  2INP
DLM-8   16ms  4INP

*9 Note that on the Fritz, this may show as INP: 0 rather than 1.  This appears to be a bug in the firmware