Fibre Broadband

Forums › New Zealand Broadband › Fibre Broadband

lemuzz

66 posts

Master Geek
+1 received by user: 2

Topic # 201353 15-Aug-2016 11:09

We have recently had fibre laid in our area. Countless Broadband suppliers have made maildrops asking to be considered as our preferred internet supplier, with most if not all offering deals. Most (maybe all) offer a free modem.

We have Voip phones and when we installed them we needed a new modem and have a TP Link 300Mbps Wireless N ADSL 2+ modem router

Model TD-VG3631

Because we have a near new router which works well on copper lines, do we need a new router for fibre?

PeterReader

5542 posts

Uber Geek
+1 received by user: 249

Trusted

Geekzone

Lifetime subscriber

Reply # 1611814 15-Aug-2016 11:09

Hello... Our robot found some keywords in your post, so here is an automated reply with some important things to note regarding broadband speeds.

If you are posting regarding DSL speeds please check that

you have reset your modem and router
your PC (or other PCs in your LAN) is not downloading large files when you are testing - you are not being throttled by your ISP due to going over the monthly cap
your tests are always done on an ethernet connection to the router - do not use wireless for testing
you read this topic and follow the instructions there.

Make sure you provide information for other users to help you. If you have not already done it, please EDIT your post and add this now:

Your ISP and plan
Type of connection (ADSL, ADSL2, VDSL)
Your modem DSL stats (do not worry about posting Speedtest, we need sync rate, attenuation and noise margin)
Your general location (or street)
If you are rural or urban
If you know your connection is to an exchange, cabinet or conklin
If your connection is to a ULL or wholesale service
If you have done an isolation test as per the link above

Most of the problems with speed are likely to be related to internal wiring issues. Read this discussion to find out more about this. Your ISP is not intentionally slowing you down today (unless you are on a managed plan). Also if this is the school holidays it's likely you will notice slower than usual speed due to more users online.

A master splitter is required for VDSL2 and in most cases will improve speeds on DSL connections. Regular disconnections can be a monitored alarm or a set top box trying to connect. If there's an alarm connected to your line even if you don't have an alarm contract it may still try to connect so it's worth checking.

I recommend you read these two blog posts:

I am the Geekzone Robot and I am here to help. I am from the Internet. I do not interact. Do not expect other replies from me.

trig42

Banana?
4428 posts

Uber Geek
+1 received by user: 1054

Subscriber

Reply # 1611837 15-Aug-2016 11:27

Your current modem will work as one of the Ethernet Ports can be used as a WAN port (EWAN).

After a quick search it seems that that router also supports VLAN tagging, so should work with all flavours of UFB.

If you go with Bigpipe, they don't require VLAN tagging, so it should work fine with them.

richms

21392 posts

Uber Geek
+1 received by user: 4336

Trusted

Subscriber

Reply # 1611848 15-Aug-2016 11:40

100 megabit, and on ones when you use the lan port as a wan port there can be other congestion issues in the internal switch that make it not able to even get the full 100 meg each way.

If you go on the cheapest slowest fiber plan it will be fine, but a half decent one or better, it is a potential bottleneck.

Richard rich.ms

Brumfondl

947 posts

Ultimate Geek
+1 received by user: 412

Trusted

Subscriber

Reply # 1611854 15-Aug-2016 11:46

And isn't the router offered by Vodafone, Spark, and BigPipe wireless AC as opposed to N? That would make it better than what you have anyway.

lemuzz

66 posts

Master Geek
+1 received by user: 2

Reply # 1612155 15-Aug-2016 19:27

Thanks guys. Maybe will get a new router.