Linksys WAG200G Firmware

Forums › New Zealand Broadband › Linksys WAG200G Firmware

wh0beme

58 posts

Master Geek

#26390 21-Sep-2008 10:17

I am having trouble with picking my firmware for an upgrade to my WAG200G.
I am looking here: http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US/Layout&cid=1169671246380&pagename=Linksys/Common/VisitorWrapper

And I get the latest two:

ftp://ftp.linksys.com/opensourcecode/wag200g/1.01.06/WAG200G_v1.01.06_eu.tar.gz
and
ftp://ftp.linksys.com/opensourcecode/wag200g/1.01.05/WAG200G_1.01.05.tar.gz

Does the _eu on the end of 1.01.06 mean that it won't work here in NZ? (Or brick my router) Or will it be ok? Basically the stock firmware is pretty unstable and we are trying to upgrade to make it more stable.

slotherby

86 posts

Master Geek
+1 received by user: 1

#165935 21-Sep-2008 10:58

I go through the New Zealand site www.linksys.co.nz and get to the following page
http://www-nz.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=NZ%2FLayout&cid=1169671629543&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=2954329310B136&displaypage=nodata#versiondetail

I am using the 1.01.06 (Annex A) and its very stable.

wh0beme

58 posts

Master Geek

#165943 21-Sep-2008 11:12

slotherby: I go through the New Zealand site www.linksys.co.nz and get to the following page
http://www-nz.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=NZ%2FLayout&cid=1169671629543&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=2954329310B136&displaypage=nodata#versiondetail

I am using the 1.01.06 (Annex A) and its very stable.

Thanks mate, works perfectly