Enable Fibre ETP to ITP fibre

Forums › New Zealand Broadband › Enable Fibre ETP to ITP fibre

darkasdes2

448 posts

Ultimate Geek
+1 received by user: 83

#319689 22-May-2025 14:14

Does anyone know where I can purchase the fibre lead used between the ETP and ITP?

Currently doing some renos and will be moving our ONT.

I did contact Enable and they said to contact Humes.. which I thought was a bit odd.

I know I will have to contact Enable to get someone out to splice the new lead.

Thanks in advance.

saf

221 posts

Master Geek
+1 received by user: 533

ID Verified

Trusted

Vetta Group

Subscriber

#3375681 22-May-2025 15:03

That's very bizarre that Enable referred you to Humes.

As the LFC is responsible to the ONT, which includes the fibre from ETP-ITP-ONT, this would fall into an internal relocation, which officially needs to be performed by Enable as the LFC. You'll need to contact your ISP to kick this off.

My views are as unique as a unicorn riding a unicycle. They do not reflect the opinions of my employer, my cat, or the sentient coffee machine in the break room.

nztim

4013 posts

Uber Geek
+1 received by user: 2710

ID Verified

Trusted

TEAMnetwork

Subscriber

#3375683 22-May-2025 15:14

Let Enable manage this End to End including supplying and installing everything

Any views expressed on these forums are my own and don't necessarily reflect those of my employer.

wellygary

8810 posts

Uber Geek
+1 received by user: 5287

#3375690 22-May-2025 16:16

saf:

Contact your ISP to kick this off.

This,

Don't bother your LFC directly-you'll likely land in the wrong department, let your ISP push it through the correct channel

crazynz101

12 posts

Geek

Subscriber

#3375776 22-May-2025 18:50

Hi, I have one of the internal leads,flick me a dm.

SomeoneSomewhere

1882 posts

Uber Geek
+1 received by user: 1086

Lifetime subscriber

#3375782 22-May-2025 19:26

It sounds like OP wants to pre-run the cable so that it can be run nicely and the walls closed up before the ONT gets moved. Pretty reasonable request IMHO; not too unlike wanting to bury the duct under your driveway yourself, rather than have the duct, fibre, and ONT installed all on the same day...

When I was doing new builds in Chorus-Land we used OptiCat5e. I expect the same would work for Enable. Option two is conduit and draw-wire.

crazynz101

12 posts

Geek

Subscriber

#3375784 22-May-2025 19:34

Ah yep, just re-read the original post! My business handles fibre installs across Christchurch and other parts of NZ. If the OP needs someone to install from the ETP to the ONT and take care of the splicing, we can get that sorted.

Mighty Ape

Shop now at Mighty Ape (affiliate link).

darkasdes2

448 posts

Ultimate Geek
+1 received by user: 83

#3375789 22-May-2025 20:50

Hi all

Thanks for all the replies.

Yes, just want to make things all tidy while I have good access during the renos.

darkasdes2

448 posts

Ultimate Geek
+1 received by user: 83

#3375792 22-May-2025 21:04

crazynz101:

Hi, I have one of the internal leads,flick me a dm.

DM sent

raytaylor

4076 posts

Uber Geek
+1 received by user: 1296

Trusted

#3381879 8-Jun-2025 23:15

In chorusland you just go down to Ideal Electrical or JA Russell and get some opticat. You then install it between where you want the new ITP location, and the existing ETP while the walls are open.

When your ready to get it connected, you just call up your ISP and ask for an ONT relocation truck roll.

I am sure Enable would have a similar process where you can pre-run the cable for them at your convenience, assuming they accept opticat can be used, and then their tech just comes and splices it for you.

Ray Taylor

There is no place like localhost

Spreadsheet for Comparing Electricity Plans Here

Earbanean

1110 posts

Uber Geek
+1 received by user: 377

#3381915 9-Jun-2025 09:08

crazynz101:

Ah yep, just re-read the original post! My business handles fibre installs across Christchurch and other parts of NZ. If the OP needs someone to install from the ETP to the ONT and take care of the splicing, we can get that sorted.

When we renovated, and had fibre installed for the first time, our sparky ran fibre (hybrid cable?) from ETP location to ONT location. However, the splicing at either end had to be done by the Chorus contractor. They also wanted to be able to check the cable run for bends etc prior to doing the splicing etc, so we needed to arrange a visit for that prior to gib and flooring going on.

darkasdes2

448 posts

Ultimate Geek
+1 received by user: 83

#3382008 9-Jun-2025 11:18

Hi all

All has been sorted and ONT is now in the new location.

Thanks for the the replies.