with woosh wireless with phone via their gateway and a linksys BEF11S4 wireless router ,i followed all the instruction with the linksys and not working ,is it because of the woosh gateway??? ,is it possible to connect the linksys to woosh's gateway??? or do i have to connect direct to the modem and loose my woosh phone??
its been a long time since i was on woosh, if my memory serves me correct the woosh gateway ip is locked at 192.168.1.1. however the linksys should link in ok. Im amazed people still use woosh, i had nothing but trouble with their equipment and service. go copper go ;)
Plug the router in to your PC, then you can probably adapt these instructions for the Netgear Router we normally supply to suit your Linksys.
Step 1: Open Internet Explorer In the address bar type 192.168.1.1 Enter the Router's Username and Password
Step 2: Click on ‘LAN IP Setup’ from the menu on the left (towards the bottom). The ‘IP address’ is currently 192.168.1.1, change this to 192.168.1.99. Where it says ‘Use Router as DHCP’, untick this. Click: Apply
Step 3: The router will then apply the settings and reboot. To log into the router from now on the IP address is 192.168.1.99
Step 4: Plug an Ethernet cable into the ‘PC port’ on the Gateway and one of the four ‘LAN ports’ on the router.
Step 5: The router is now configured and cabled for correct use with the Gateway.
Twitter and LinkedIn »
Follow us to receive Twitter updates when new discussions are posted in our forums: