scenario
Dynalink RTA1025W router
Suburban area
Slingshot Ultra plus 25G plan LS/128k (just updated)
| Line Mode | T1.413 | Line State | Show Time |
| Latency Type | Interleave | Line Up Time | 00:01:53:58 |
| Line Coding | Trellis On | Line Up Count | 2 |
| Statistics | Downstream | Upstream |
| Line Rate | 2272 Kbps | 160 Kbps |
| Attainable Line Rate | 2592 Kbps | 736 Kbps |
| Noise Margin | 13.3 dB | 28.0 dB |
| Line Attenuation | 57.0 dB | 30.0 dB |
| Output Power | 17.5 dBm | 11.6 dBm |
Broadband Speed Test Meter
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Your line speed is approximately 540.9 Kbps or 66.3 K bytes/sec |
This just doesn't seem right - where have i gone wrong???
feels really slow especially when i'm downloading from international sites...
any posible answers?
I have put in an extra wall jack point by telecom - to get a closer range between router and pcs. would this cause any slowing?
the telecom installer tucked phone lines in wherever posible to do a clean installation... would that have affected noise in the new jack point?
from the old jack point I use to get something like 3082 Kbps for Attainable line rate which isn't all that much different (or is it?)
