help with clie bluetooth sync

Forums › Legacy mobile platforms (Windows Mobile, Palm OS, Web OS, Symbian, Meego, Blackberry) › help with clie bluetooth sync

kgee

5 posts

Wannabe Geek
Inactive user

#1533 12-May-2004 06:02

please help if you can. i have installed and properly paired my bluetooth adapter and sony clie ux-50. i have set up the connection on my clie as directed for bluetooth sync. but i now get:

"Unable to initiate HotSync operation becasue the port is in use by another application"

i have my usb adapter plugged into a hub that hosts my wireless mouse and keyboard but i didn't think that would matter. for the record, the COM port in setup is assigned to the COM port in my device manager assigned to bluetooth.

thanks.

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41030

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#5690 12-May-2004 07:31

It sounds like the COM port select on Hotsync is already in use. Do you have ActiveSync, an external modem, or a Bluetooth mobile phone with synchronisation software configured to use this port?

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

kgee

5 posts

Wannabe Geek
Inactive user

#5691 12-May-2004 07:52

i don't have any of those....anymore tips?

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41030

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#5692 12-May-2004 08:00

Check that you have select the Incoming COM port as the one under the Local Services, not Clients in your Bluetooth configuration

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

kgee

5 posts

Wannabe Geek
Inactive user

#5694 12-May-2004 10:11

i am still not having any luck. under the local tap in my configurations, i see COM7 and there is not a COM designation in the clients tap. anymore suggestions? thanks!

kgee

5 posts

Wannabe Geek
Inactive user

#5708 13-May-2004 07:03

ok...here's the weird thing....by the way...i have rebooted my computer a few times...

yesterday, i finally got it to sync. it was no problem but check this out, i had to go to my "bluetooth neighborhood" and highlight the PDA in the list. i did not change any of the configurations or properties but once i clicked it (single click) i was able to sync through....

this kinda defeats the purpose, i would like for this to be seamless....any suggestions?

freitasm

BDFL - Memuneh
80646 posts

Uber Geek
+1 received by user: 41030

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#5711 13-May-2004 10:22

Good that it syncs. But do you have to click on the icon every time, or is it working since then? Also, remember the Hotsync must be initiated from the PDA.

Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

Lego

Shop now for Lego sets and other gifts (affiliate link).

kgee

5 posts

Wannabe Geek
Inactive user

#5715 13-May-2004 14:44

actually, i had to click...highlight the PDA icon in the bluetooth configuration and then silk the hotsync button on the PDA everytime. i ended up re-installing the palm software. deleting all the previous versions...and now it works fine. thanks for the input...it has been a struggle... whew.....