Veon tv and coax port

Forums › Gaming › Veon tv and coax port

BluKing35

10 posts

Wannabe Geek
+1 received by user: 1

Topic # 162224 2-Feb-2015 15:33

So I was woundering if this port on my tv was for audio input or output coax it doesn't say in the booklet that came with the tv and just says coax next to it on the tv and was hoping if I could hook up a sound bar throw it as the speakers on tv and that good it's a Veon SRO9108-B
https://images.geekzone.co.nz/imagessubs/06e056b9d315f61881353c370f3397a5.jpg

RunningMan

5155 posts

Uber Geek
+1 received by user: 1673

Reply # 1227838 2-Feb-2015 16:04

Most likely SPDIF digital audio out to send mukti channel audio to a surround sound amp

joshhill96

You're typing with Josh!
1406 posts

Uber Geek
+1 received by user: 143

Trusted

Subscriber

Reply # 1227840 2-Feb-2015 16:05

Hey BluKing35

Yes that is Coax Output, alongside the Headphone jack for your external audio devices. So you should be fine hooking it up to a Soundbar.

wellygary

3454 posts

Uber Geek
+1 received by user: 960

Reply # 1227866 2-Feb-2015 16:24

My guess it that its either a Video in connection for legacy equipment ( VHS deck etc), or an analog video out connection so you can dairy chain a VHS off the back,

I pulled the manual from gawd knows where, but it offers absolutely no indication what VEON use this port for

http://www.orientalpacific.com/backend/files/products/manuals/439/user%20manual%20for%20VN2280LED-FHD%20and%20VN2480LED-FHD.pdf

BluKing35

10 posts

Wannabe Geek
+1 received by user: 1

Reply # 1232995 8-Feb-2015 16:50

thx all it is a audio out

Ti

46 posts

Geek
+1 received by user: 1

Reply # 1260215 16-Mar-2015 13:19

@BluKing3.5
How did this work out for you? I tried connecting an external device (Veon VN2910-CR) and although the audio did come through (mono of course) it is very faint and carries a lot of "interference".

BluKing35

10 posts

Wannabe Geek
+1 received by user: 1

Reply # 1260253 16-Mar-2015 13:39

One person supports this post

Ti: @BluKing3.5
How did this work out for you? I tried connecting an external device (Veon VN2910-CR) and although the audio did come through (mono of course) it is very faint and carries a lot of "interference".

Worked out well I got my self a 7.1 surround sound system now my whole room shakes lol

Spyware

2066 posts

Uber Geek
+1 received by user: 343

Lifetime subscriber

Reply # 1260296 16-Mar-2015 14:32

One person supports this post

Ti: @BluKing3.5
How did this work out for you? I tried connecting an external device (Veon VN2910-CR) and although the audio did come through (mono of course) it is very faint and carries a lot of "interference".

VN2910-CR has no digital audio in so couldn't possibly work.

Ross

Spark FibreMAX using Mikrotik CCR1009-8G-1S-1S+

Speed Test

Ti

46 posts

Geek
+1 received by user: 1

Reply # 1260308 16-Mar-2015 14:52

That makes a lot of sense - many thanks!

RunningMan

5155 posts

Uber Geek
+1 received by user: 1673

Reply # 1260332 16-Mar-2015 15:21

Spyware:
Ti: @BluKing3.5
How did this work out for you? I tried connecting an external device (Veon VN2910-CR) and although the audio did come through (mono of course) it is very faint and carries a lot of "interference".

VN2910-CR has no digital audio in so couldn't possibly work.

This.

This is a digital coax output for multi channel digital audio. If you are getting any sort of audible analogue signal, it will be unintended crosstalk from another audio circuit.