Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


whitefoxxx

91 posts

Master Geek


#29847 21-Jan-2009 12:30
Send private message

im trying to connect to xbox live for the first time.
i have it connected to my dynalink router.
when i run the setup it fails on the mtu settings and says i may need to change the value but i cannot find where to change this in the router settings. can anyone help me out ?? :)





Create new topic
heretohelp
370 posts

Ultimate Geek
+1 received by user: 2


  #191984 25-Jan-2009 16:25
Send private message

Have you got this sorted yet?


a couple of questions first off

has your data been caped. when i was on a caped plan i use to get that error when they caped me to dial up speeds.

secound off who is your isp. normally routers are set to 1500 by defult. i have heard of people ringing there isp's and aksing what they recomend and somtimes they are differnt so i would be getting that first b4 you go any further. just to make sure.


when you say dynalink router. what type of broad band do you have


satalite, adls cable wireless other.


for example if its adsl normal broad band. is the dynalink router attached to a modem or is the dinalink router the adsl router as well.

if your dynalink attaches to a adsl router i would suggest that you plug the xbox directly into the adsl router and see if that fixes it.


post back let me know how you get on. also could you please post the model and the firm where number of your dynalink router thanks





Hu? did i do that?
16Mb (EDO RAM), K6-II processor, 2Mb of onboard graphics. 32k dial up modem. 12 speed CD ROM. 5¼-inch floppy drive. 500Mb HDD.

Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.