phone wireing

Forums › LAN (ethernet/Wi-Fi/routers/switches/Bluetooth) › phone wireing

xmanz

57 posts

Master Geek
+1 received by user: 1

#196346 27-May-2016 18:05

Sorry if wrong section but can someone show me how to re wire this up please. It got dissloged when decorating… thank you.. Can't see where to add pic so have gone like this

https://mega.nz/#!3A8lhBQA!P5SQeZiExY5kserPfxiYxhEHRElgfi3vAPJBLh7f9gs

richms

29591 posts

Uber Geek
+1 received by user: 10630

Trusted

Lifetime subscriber

#1560905 27-May-2016 18:21

LInk doesnt show an image for me, 25 seconds of loading and nothing.

Richard rich.ms

xmanz

57 posts

Master Geek
+1 received by user: 1

#1560908 27-May-2016 18:43

Hmm. On the full site can I post pics

richms

29591 posts

Uber Geek
+1 received by user: 10630

Trusted

Lifetime subscriber

#1560909 27-May-2016 18:46

I find it easier to tweet pictures and then embedd them when I am on mobile compared to the uploader on here.

Richard rich.ms

xmanz

57 posts

Master Geek
+1 received by user: 1

#1560911 27-May-2016 18:51

Try this please

https://onedrive.live.com/redir?resid=C92F0A325128F4B6!3520&authkey=!AEPOLb8NmY8jIg4&v=3&ithint=photo%2cjpg

richms

29591 posts

Uber Geek
+1 received by user: 10630

Trusted

Lifetime subscriber

#1560920 27-May-2016 19:26

Try yellow and black into 2 and 5. The outdoor wire is thicker than the indoor stuff so would normally have been joined on with joiners since the slots dont take 2 different sizes of wires that well. The fact that they are stripped makes it look like someone did a ghetto fix up and stuck them into the terminals in the past as no telco installer would leave it like that unless they were actually a sky installer.

If yellow and black do not work, then try the other pair of white and brown into 2 and 5 as it may be set up on the second pair.

2 and 5 are where the line goes in any case, polarity does not matter.

Richard rich.ms

InstallerUFB

840 posts

Ultimate Geek
+1 received by user: 219

#1560921 27-May-2016 19:29

1.You need a tool known as a Krone tool to terminate this connection properly

2. The wiring that is still on the jackpoint is none standard. The red and the green wires are around the wrong way but dont change it if that is the way they were.

3. The other cable appears to be the incoming line - the standard colour sequence is Yellow & Black , White & Brown. If this is standard then the Yellow should be punched down over the Green wire and the Black should be punched down over the white wire.

Geekzone support

Support Geekzone with one-off or recurring donations Donate via PressPatron.

xmanz

57 posts

Master Geek
+1 received by user: 1

#1560933 27-May-2016 20:09

Thank you very much now works