Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
ZZZLEE

11 posts

Geek


#887 6-Aug-2003 01:07
Send private message

Dear freitasm

I had followed your instructions to set the IP for Bluetooth Adapter tp 192.168.0.1 and network adapter tp 192.168.2.1 . I can use the ICS for about 20seconds, after that the network connection within the pc and pocket pc disconnected. Is there any problem on the setting?

Desperate for help.

Windows IP Configuration

Host Name . . . . . . . . . . . . : DearDearServer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : D-Link DFE-538TX 10/100 Adapter
Physical Address. . . . . . . . . : 00-05-5D-31-B5-D9

Ethernet adapter Bluetooth Network:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver
Physical Address. . . . . . . . . : 00-10-DC-E9-5D-92
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

PPP adapter Doalcom:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 210.195.48.105
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 210.195.48.105
DNS Servers . . . . . . . . . . . : 202.188.1.5
202.188.0.133
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Documents and Settings\Lee Yong Heng>

ZZZLEE



ZZZLEE

11 posts

Geek


#1107 20-Aug-2003 10:44
Send private message

freitasm

I managed to solved the bluetooth problem, currently the ICS work Well.

Thanks you very much.

ZZZLEE


chrisash32
5 posts

Wannabe Geek
Inactive user


#1334 7-Sep-2003 11:43
Send private message

hey, pleaseeeeeeeeee can you tel me houw you got it working, i have exacallty teh same prob, and have been say her for 10 hours solid tryin tog et ICS working with my HP2210 and have had no luck at all.....

i think i have a slightly different network setup to urself, but not that much different.
i have a linux server (dedicated firewall) i just leave it along and it doesnt affect ICS then that goes into my hub along with all my other computers.
My Server's IP is 192.168.0.1
The computer that the iPAC is comected to is: 192.168.0.2
my bluetooth that plugs into my PC sets up as a network device and i have tried nearly every combination fo IP address for that, and also tried a loada IP;s on my HP2210. i have had no luck at all with anything, and it is a bit stressign as well concidering it was 1 of teh main reasons i baught the HP2210 for.

Thanks
Chris



freitasm
BDFL - Memuneh
80650 posts

Uber Geek
+1 received by user: 41032

Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber

#1340 7-Sep-2003 16:14
Send private message

Chris, you say your server ip is 192.168.0.1. ICS requires this address, and no other computer in your network can have it. This is your problem.

If you can not give this address to the Bluetooth Adapter (on the computer hosting the connection), then you'll have to use a third party software, like Winrouter Lite.

Have a look in our guides again to check this. A lot of people miss this.




Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies 

 

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

 


chrisash32
5 posts

Wannabe Geek
Inactive user


#1342 7-Sep-2003 21:54
Send private message

hi
still no luck with win router lite
i have a bit of a weard setup, i have drawn an image to show you but it will not let me attach it to the post, if you could email me on chrisash32@ntlworld.com i will be able to reply and send you the image.

thanksyou
chris

1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.