Access Admin for Draytek Vigor 120 Bridged to DD-WRT

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Access Admin for Draytek Vigor 120 Bridged to DD-WRT

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#100494 12-Apr-2012 12:44

I have a TP-Link router running DD-WRT that sits in front of a Draytek Vigor 120 ADSL modem. The ADSL modem is set up in bridge mode, so the DD-WRT router dials the PPPoE. Problem with this setup is that I cannot access the config for the Draytek without unplugging it from the DD-WRT box and plugging a PC in directly.

Is there a way to set up some kind of routing through the DD-WRT box so that I can access the ADSL stats/config from the LAN?

Twitter: ajobbins

theEd

341 posts

Ultimate Geek
+1 received by user: 26

Trusted

#608222 12-Apr-2012 13:14

See this thread, which is for Tomato but should be very similar.

cisconz

cisconz
1348 posts

Uber Geek
+1 received by user: 179

ID Verified

Trusted

Lifetime subscriber

#608224 12-Apr-2012 13:20

Looks correct to me, I use a Mikrotik and do the same thing.

WAN Interface 192.168.1.2 - Masqueraded
PPPoE interface assigned to the WAN Interface

Hmmmm

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#608225 12-Apr-2012 13:23

theEd: See this thread, which is for Tomato but should be very similar.

I looked at that, but it starts with "then in tomato under administration, scripts, firewall, add this line"

DD-WRT doesn't have this option. And I can't seem to find it anywhere else either.

Twitter: ajobbins