telecom vdsl modem

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › telecom vdsl modem

xmanz

57 posts

Master Geek
+1 received by user: 1

#148632 25-Jun-2014 13:53

hi all i have a Technicolor TG589vn v2 modem and i was looking in it to see if theres anything that might upset play quakelive (i believe uses udp)

so in my intrusion tab its has udp rate limiting now this has a large value of 40243.. and i remeber clearing logs only 2 weeks ago so could this be my qlive problem of allways unsmooth laggy even thoi ping 31 to auck servers. it feels all i describe this as (squishy) and just feels like maybe info doesnt get to me on time? any bearing plz anyone can the threshold be edited?
thank you phil

wasabi2k

2101 posts

Uber Geek
+1 received by user: 856

#1074275 25-Jun-2014 14:10

you can disable ids completely.

telnet to router IP, logon as Administrator

http://www.geekzone.co.nz/forums.asp?topicid=126875

To disable IDS:

telnet x.x.x.x (your router IP)
ids config state=disabled
saveall
exit

Note: IDS is a useful security feature and disabling it does reduce the ability of your router to identify threats, so do so at your own risk.

xmanz

57 posts

Master Geek
+1 received by user: 1

#1074283 25-Jun-2014 14:21

thank you do you think this has any bearing whatsoever on quakelive udp ? also are there any setting i need to change via the lan cable/modem as telnet wont let me in at the moment ?

xmanz

57 posts

Master Geek
+1 received by user: 1

#1074398 25-Jun-2014 16:48

Hmmm not sure if passwords play up on this router but it wontlet me in i used to have blank pass/log then i set one up thinking telnet doesnt handle blank? but now telnet still doesnt like the password

thanx