Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Forums › LAN (ethernet/Wifi/routers/Bluetooth) › OpenWrt on Spark UFB/Fibre
xubuntuosxx

1 post

Wannabe Geek


#173895 10-Jun-2015 00:41
Send private message

Hi,

I'm currently having problems with setting up OpenWrt to work on Sparks UFB.
My router is a Linksys WRT1900ac. With stock firmware, I managed to get it working with the Spark credentials (user@xtrabb.co.nz password) and vlan tagging (on vlanid 10).
With OpenWrt, I cannot seem to get it to work.
I've set up PPPoE on the WAN interface and made a new vlan with id 10 and assigned the wan interface this plan interface (eth0.10) but it doesn't seem to connect to the ONT. 
Any input from someone with OpenWrt working on fibre (possibly even config files) would be awesome :).

Cheers

Create new topic
Aredwood
3885 posts

Uber Geek
+1 received by user: 1749


  #1322008 10-Jun-2015 12:19

Check you have the PPP interface on the vlan and not direct on the ethernet. I made that mistake when I first got my Edge router. And I couldn't figure out why it didn't work. (I had the vlan and PPP separately on the same interface)





Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Updates »

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.








RSS feeds
Main feed
Forums feed
Copyright
©2002-2026 Geekzone®
Site features
Geekzone BI dashboard
Geekzone Badges
Geekzone Status Page

 

Site Information
Subscribe to Geekzone
Privacy Statement
Forum Usage Guidelines (FUG)
Advertising
Trademark and copyright