ASUS RT-AC3200 with Spark Fibre

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › ASUS RT-AC3200 with Spark Fibre

waterworthd

3 posts

Wannabe Geek

#175365 26-Jun-2015 11:19

Hi,

Does anyone know if it's possible to connect to Spark Fibre using an ASUS RT-3200 router (https://www.asus.com/nz/Networking/RTAC3200/)? Can you plug the WAN port into the fibre terminating box or do you need a fibre modem?

Regards
Dave

Inphinity

2780 posts

Uber Geek
+1 received by user: 1184

#1332000 26-Jun-2015 12:00

Connect the WAN port on the RT-AC3200 to the ONT, and make sure you set the Vlan/VID to 10 for the WAN interface.

waterworthd

3 posts

Wannabe Geek

#1332530 27-Jun-2015 08:23

Hi,

Thanks, I read that somewhere else but couldn't figure out how to make it work. I couldn't find a specific setting for VLAN/VID on the WAN page - only on the LAN settings and that didn't seem to have any effect?

Dave

Xeon

302 posts

Ultimate Geek
+1 received by user: 43

#1332581 27-Jun-2015 13:20

Should be this:
http://www.geekzone.co.nz/forums.asp?forumId=40&topicId=143367

jaghoriland

9 posts

Wannabe Geek

#1337002 4-Jul-2015 18:25

i am sure this going to work

waterworthd

3 posts

Wannabe Geek

#1337314 5-Jul-2015 15:49

I've tried following the instructions above but no luck so far, it has the same configuration screens but no matter how many times I restart either the device or the fibre ONT it wont connect.