Mikrotik RB952Ui-5ac2nD 802.11ac bridging

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Mikrotik RB952Ui-5ac2nD 802.11ac bridging

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Topic # 191662 11-Feb-2016 17:51

Trying to use the Mikrotik RB952Ui-5ac2nD router as a 5GHz bridge.

I have a computer and a couple of laptops using 5GHz WiFi ok.

The router bridging works ok on 2.4GHz.

Basic config is CPE, static IP, mask and a gateway to my AP Router.

Available APs show in the Mikrotik router for 2.4GHz only.

If I scan the 5GHz WLan (in the Mikrotik router) I see my Lynksys EA6700 but but the 5GHz AP doesn't appear in the available APs list.

Anyone else been able to get 5GHz bridging working?

Thanks

Cheers

Gordy

sbiddle

27149 posts

Uber Geek
+1 received by user: 6580

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 1490747 11-Feb-2016 19:46

What channel are you using? What wireless mode setting are you using?

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1490756 11-Feb-2016 20:04

sbiddle:

What channel are you using? What wireless mode setting are you using?

In another Mikrotik thread you have mentioned:

With no band steering in RouterOS it's hard to recommend it as a WiFi solution right now.

That may be my problem... RouterOS may just pick the easiest (2.4GHz) option.

That has made me think that I may be able to disable 2.4GHz WiFi in RouterOS... have tried to disable 2.4GHz in the Wireless interface page but 5GHz does not link up.

Thanks

Gordy

sbiddle

27149 posts

Uber Geek
+1 received by user: 6580

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 1490767 11-Feb-2016 20:24

It's not band steering.

What channel width and frequency is your main AP on? It's probably best to set this back to 20MHz and a common frequency such as 5180 or 5260 that'll be supported by both radios because the issue is very likely to be a mismatch. Once you have this working you can then play with other settings.

I'd pick your current AP is probably on 40MHz but you'll have no idea if this is Ce or Ec (which determines if the HT control channel is above or below). On a device this makes do difference, but if you want a Mikrotik to connect it does.

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1490812 11-Feb-2016 23:08

Still playing about with the Mikrotik in bridge mode and trying to find a 5GHz AP.

Set up tried: 802.11 AC only, 20MHz and Freq 5240.

Still do not see the 5GHz AP on the Mikrotik.

Interesting that the Linksys Router (EA6700) seems to have very few 5GHz chan freqs. (may depend on channel width)

Also on a remote computer, using inSSIDer I can see that the Linksys router is active on 5240 and the next lower freq.

Also managed to upgrade the firmware in the Mikrotik from 6.30.4 (July 2015) to 6.34.1 (Feb 2016).... a massive list of fixes.

More to try...

Gordy

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1493045 16-Feb-2016 09:36

From Mikrotik support:

Quickset wasn't designed for Dual band CPE option.

You can try to configure manually the wireless interfaces.

WLan1 is 2.4GHz and WLan2 is 5GHz.

So have been doing just that, WLan2 does appears to connect, but no data is transferring.

Discussion with Mikrotik support is ongoing.

Gordy

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1500289 27-Feb-2016 09:28

Problem with 5GHz (WLan2) CPE bridging is still not fixed.

However, after some discussion with Mikrotik, I set up a test computer for remote login.

Mikrotik was able to repeat my setup scenario. 
Now Mikrotik developers are fixing this issue and will shortly be able to release fixed version.

Hopefully it will be a firmware fix.

Gordy

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1508720 9-Mar-2016 10:44

Problem with 5GHz (WLan2) CPE bridging is now fixed.

Have just downloaded and installed RouterOS 6.35rc21.

802.11ac CPE bridge mode is now linked and transferring data.

All good!

Gordy

sbiddle

27149 posts

Uber Geek
+1 received by user: 6580

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 1508722 9-Mar-2016 10:52

Out of curiosity was it 6.35 that fixed it or the new wireless-rep wireless package?

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1509740 9-Mar-2016 11:26

sbiddle:

Out of curiosity was it 6.35 that fixed it or the new wireless-rep wireless package?

Not sure about the wireless-rep... Just installed 6.35rc21 this morning which got the 802.11ac CPE bridging going...

In the file what's new in 6.35rc21 (2016-Mar-08) the docs show:

*) wireless-rep - fixed speed issue when connected with Intel 802.11ac;

*) wireless - added new package "wireless-rep"

and a few others relating to wireless... wireless-rep, qos with nv2... improved 1 chain 802.11ac station compatibility...

and quite a few others... 802.11 roaming... actually too many to list without including the whole file.

Gordy

sbiddle

27149 posts

Uber Geek
+1 received by user: 6580

Moderator

Trusted

Biddle Corp

Lifetime subscriber

Reply # 1509742 9-Mar-2016 11:31

I keep an eye on the RC's as I use a lot of Mikrotik hardware.

In packages you'll see the wireless packages and only one can be active - I'm assuming if you upgraded then it's probably using the wireless-cm2 package still rather than wireless-rep

Lots of the new changes only apply to the wireless-rep package which is a brand new wireless package

Gordy7

606 posts

Ultimate Geek
+1 received by user: 63

Lifetime subscriber

Reply # 1509747 9-Mar-2016 11:39

I do not see wireless-rep as such in the package list.

Here is my default package list:

What's new in 6.35rc21 (2016-Mar-08 09:04):

*) winbox - improved winbox connection loss detection, fixes winbox safe mode;

*) wireless-rep - fixed speed issue when connected with Intel 802.11ac;

*) fetch - fixed TTFP download;

*) snmp - don't group oids for bulk get with maxreps > 1;

*) users - added separate RoMoN policy (Winbox v3.2 and above required);

*) ppp - fixed ppp crash (make it work with Windows clients);

*) l2tp - implemented l2tp and lns fastpath/fasttrack support;

*) cerm - revoked certificates not showing as (R)evoked;

*) console - show RouterOS Version in /interface wireless scan;

*) export - bonding did not show up in global export;

*) export - fixed export when ipv6 address was taken from pool

*) fetch - decrease connection idle timeout;

*) ipsec - better flush on proposal change;

*) webfig - show single item groups as optional values;

*) webfig - sort numeric columns numerically even if they contain some text;

*) winbox - added /interface wireless setup-repeater;

*) winbox - added all the rates settings to the capsman;

*) winbox - added flip-screen option to lcd settings;

*) winbox - added missing eap-ttls-mschamv2 method to wireless security profile;

*) winbox - added support for new settings from wireless-rep package;

*) winbox - disable autostart for wireless scan,snooper,align etc. on open;

*) winbox - fixed typo in "echo reply";

*) wireless - fixed crash when ap is in cap mode (introduced in v6.35rc15);

*) pppoe-client - implemented fastpath support;

*) ssh - fix crash on failed scp read;

*) chr - fixed crash when layer7 firewall option used;

*) gre - fixed memory leak;

*) snmp - fixed dhcpv4 lease hwaddr format according to mib;

*) rb3011 - fixed high cpu load breaks ethernet stats;

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);

*) pppoe - added rfc4679 support;

*) pppoe-server - added pado-delay option;

*) ppp - close connection if peer wants to re-authenticate;

*) winbox - added missing modp8192 to /ipsec peer dh-group;

*) winbox - limit ospf key to 16 symbols;

*) snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;

*) mpls - do not reset VPLS on TE tunnel re-optimize;

*) lcd - add flip-screen option;

*) lcd - security screen did not show ip addresses on ccr;

*) interface queue - fixed "no-queue" on upgrade;

*) fastpath - fixed rare kernel failure;

*) lte - fixed bandlux modem dialing;

*) wireless-rep - fixed qos frame-priroty when nv2 protocol used in station-wds mode;

*) wireless - improved 1-chain 802.11ac station campability with other vendor multichain APs;

*) ssl - optimized certificate update;

*) ospf - fixed crash when getting neighbor router-id in NBMA area;

*) romon-ssh - fixed active addresses for romon user;

*) email - fix send cmd server addr override;

*) lte - added ipv6 support for SXT LTE;

*) ipsec - fix multiple consecutive dynamic policy flush;

*) winbox - added ipv6 firewall missing log option;

*) profiler - classify certificate signing;

*) services - do not show ssh entry under ip services if security package is disabled;

*) queue - added bucket-size setting to queues (derived from max-limit);

*) queue - improve "/queue interface" menu;

*) console - update copyright notice;

*) ip - rename max-arp-entries to less confusing max-neighbor-entries;

*) l2tp - added support for max-sessions;

*) l2tp - added support for proxy authentication when receiving forwarded PPPoE sessions;

*) l2tp - added support for Hidden AVP, it is needed for proxy authentication;

*) ipsec - fix larval SA refresh for display;

*) wireless-rep - added 802.11g/n only band;

*) wireless-rep,capsman - added rate config support;

*) wireless-rep,capsman - added more configuration settings;

*) ssh - simplify login process;

*) ups - fix entering hibernate mode when below battery capacity limit;

*) lte - support for zte mf820s2;

*) hotspot - clean-up all dead entries at once;

*) hotspot - fix possible deadlock;

*) queue-tree - improved nested queue limit calculation;

*) radius - warn radius client if incorrect secret is being used;

*) trafficgen - fix crash when unexpected stream reappears;

*) ipsec - always re-key ph1 because it was possible that ph1 without DPD would expire;

*) system - log time changes;

*) trafflow - fix potential deadlock;

*) certificate - allow manual crl url addition;

*) ipsec - fix fast ph2 SA addition;

*) led - fix crash on assigned interface removal;

*) lte - support Alt38XX modem;

*) tile-crypto - fix minor memory leak;

*) wireless-rep - allow to connect to AP after scan;

*) wireless-rep - fix signal leds;

*) wireless-rep - request interface name for setup-repeater;

*) wireless-rep - adjust roaming scan times;

*) wireless-rep - do not allow empty ssid for AP modes;

*) ccr1072 - fix traffic halting when sfp+ 1-4 or 5-8 where all disabled;

*) ippool6 - fix potential crash;

*) routing - fixed rare kernel failure on different dynamic routing configurations;

*) wireless-rep - fix nv2 protocol;

*) route - do not show duplicate gateway on connected route;

*) wireless - added new package "wireless-rep";

*) wireless-rep - initial support for station roaming for station mode in 802.11 protocol;

*) wireless-rep - added support for wireless repeater mode for 802.11 protocol;

*) wireless-rep - added support for wireless background scan for 802.11 protocol;

*) wireless-rep - added support for saving wireless scan results to file;

*) wireless-rep - added support for wireless scan rounds setting;

*) wireless-rep - added WPS client support;

*) wireless-rep - added STEP feature for the scan-list.

Gordy