New setup time

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › New setup time

shrub

790 posts

Ultimate Geek
+1 received by user: 272

ID Verified

#208752 26-Feb-2017 12:49

I have a problem id like some suggestions if possible.

Running fibreX gig and im over the stability and crap Wifi at my house. Currently running Mikrotik HeX to 2 old routers as access points Linksys 120N and a TP-Link WR941ND. These are terrible together and the Mikrotik is crashing when loaded up with multiple devices.

So im looking at either going all in one - Preferred

Netgear NightHawk X6 R8000 $260

Or just an access point and go back to using pfsense which does waste power.

Ubiquiti UAP-AC-PRO $290

Or has anyone got better ideas?

Dynamic

4015 posts

Uber Geek
+1 received by user: 1851

ID Verified

Trusted

Lifetime subscriber

#1726494 26-Feb-2017 13:40

I'm a big UniFi fan, and deploy these commercial on a small scale. Rock solid in my experience. Residentially they are only suitable for an enthusiast as they use a piece of management software rather than having a built in web interface.

“Don't believe anything you read on the net. Except this. Well, including this, I suppose.” Douglas Adams

Crowdie

228 posts

Master Geek
+1 received by user: 87

#1726511 26-Feb-2017 13:54

There are numerous wireless products better than Ubiquiti at a similar price including:

Aerohive Connect - http://www.aerohive.com/products/connect/
Aruba Instant - http://www.arubanetworks.com/en-au/products/networking/aruba-instant/

A number of people are also recommending Xclaim by Ruckus - https://www.xclaimwireless.com

The million dollar question is what functionality do you require? Commonly people assume they can only afford consumer or SME grade product; like Linksys, Netcomm, Ubiquiti, etc; but a number of enterprise wireless vendors are now releasing product around that price point that introduces some of the enterprise features into this market.

shrub

790 posts

Ultimate Geek
+1 received by user: 272

ID Verified

#1727055 27-Feb-2017 12:21

Well i purchased the x6 r8000 and its mint so far. Coverage is awesome I don't need 2 seperate AP's in the house anymore. Even the garage is getting wifi. Could not be happier with the wifi performance 400 down 100 up on a s6.

Cheers for the replies but going to separate wifi really is a pain to manage/setup. By going with the r8000 i have got rid of 3 devices on the network.

antoniosk

2382 posts

Uber Geek
+1 received by user: 742

ID Verified

Trusted

Lifetime subscriber

#1727110 27-Feb-2017 14:04

Are you bridging your wifi together to give you one big virtualnetwork?

________

Antoniosk

wazzageek

1095 posts

Uber Geek
+1 received by user: 108

ID Verified

Trusted

Lifetime subscriber

#1727128 27-Feb-2017 14:41

What's the setup process with the 6 antennas? Does rotating them make any difference at all?

Personally I found the NetGear Genie to be a pain in the proverbial.

shrub

790 posts

Ultimate Geek
+1 received by user: 272

ID Verified

#1727237 27-Feb-2017 16:08

The 6 antennas I just used the default positions. As far as i could work out 2 are for 2.4 and there are 2x2 5ghz AC bands so if ones slow you connect to the next. I was able to just plug it in and it was already setup for VLAN 10 amazingly. So much better than the messing around with Mikrotik/pfsense setups....

I was bridging the 2 AP's which was causing some of the issues its so much better to just have 1 device that handles it all.

The house is only 90/sqm with a detached garage.