502T Halfbridge - dummies guide please

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › 502T Halfbridge - dummies guide please

bigal_nz

635 posts

Ultimate Geek
Inactive user

#23193 21-Jun-2008 13:59

Hi Guys,

Got my 502T here for the red network (will be connected monday).

I am going to plug it into the Internet port of my Router which runs DD-WRT, but I have never been good at setting up the 502T into half bridge mode (at least thats what I think I want)

As I understand it half bridge mode the 502T will terminate the PPPoA connection and forward all traffic straight to the DD-WRT which I can use to then configure all the port fowards etc?

Can someone please write dummy proof instructions on how to do this please?

Cheers

-Al

bigal_nz

635 posts

Ultimate Geek
Inactive user

#139570 21-Jun-2008 14:00

PS: My DD-WRT is 192.168.1.1 and assigns addresses from 192.168.1.100-199.

The Dlink is of course on 10.1.1.1 and not sure yet what address range it assigns.

bigal_nz

635 posts

Ultimate Geek
Inactive user

#140927 27-Jun-2008 15:56

Stupid DLink.

I got the following to work:

<Internet>---<Dlink 502T>-----<Linksys WRT54G on DD-WRT v24>---<XP PC>

But whenever the modem disconnects/reconects it does not pass on the new IP address, unless I go into the router setup pages and click on RENEW.

Dlink blamed the Linksys, as they would. So I tried:

<Internet>--<Dlink 502T>---<XP PC>

Still would not update the PC now with the new IP, without a renew command being issued.

Anyone have any ideas?

bigal_nz

635 posts

Ultimate Geek
Inactive user

#140929 27-Jun-2008 16:05

My settings at the moment....

[URL=http://img247.imageshack.us/my.php?image=wankc5.jpg][IMG]http://img247.imageshack.us/img247/4937/wankc5.th.jpg[/IMG][/URL]

[URL=http://img235.imageshack.us/my.php?image=lansr5.jpg][IMG]http://img235.imageshack.us/img235/8486/lansr5.th.jpg[/IMG][/URL]

[URL=http://img247.imageshack.us/my.php?image=dhcpzg0.jpg][IMG]http://img247.imageshack.us/img247/8700/dhcpzg0.th.jpg[/IMG][/URL]