Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Morgenmuffel

639 posts

Ultimate Geek
+1 received by user: 58

Lifetime subscriber

#243075 26-Nov-2018 10:51
Send private message

Greetings

 

Currently we have a white orcon Genius router/modem thingie, in the middle of the house, but the signal barely reaches the lounge, i do have ethernet cable running under the house to an ethernet switch in the lounge which provides ethernet for a couple of computers etc but of course it doesn't help with the wifi.

 

 

 

i was thinking of using one of these

 

Apple airport extreme doohickeys as they seem to be small discrete and to do the exact job I want.

 

 

 

Obviously it will get its feed from the ethernet cable, so the WiFi it puts out will that be a separate wifi network or can it be configured to be the same as the existing one, or am I completely missing the point here.

 

I had previously a few years ago tried to turn an old router into a wifi extender, but for some weird reason some devices would hang on to the signal from that and not go for the signal from the genius router even when down the other end of the house where the old router signal didn't reach.





'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON


Create new topic
sbiddle
30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod
Trusted
Biddle Corp
Lifetime subscriber

  #2134259 26-Nov-2018 11:01
Send private message

Morgenmuffel:

 

I had previously a few years ago tried to turn an old router into a wifi extender, but for some weird reason some devices would hang on to the signal from that and not go for the signal from the genius router even when down the other end of the house where the old router signal didn't reach.

 

 

This won't be any different now.

 

Roaming on WiFi is complex. Unless you have hardware and devices that all support 802.11k, 802.11r and 802.11v you will not have true roaming.

 

To overcome these limitations you need to tune networks so that power levels are appropriate.




Aredwood
3885 posts

Uber Geek
+1 received by user: 1749


  #2134465 26-Nov-2018 13:54

If the Orcon router was the NF4V, they have routing bugs that cause lots of problems if you try to connect a second access point to their Ethernet ports.

I have 2 access points without proper roaming, which still works well. But I have placed them at diagonally opposite corners of the house. So that if you are near 1 of the APs, but your phone is still connected to the other one. The signal would be going through lots of obstructions. So as soon as something causes a momentary signal drop, your phone then jumps to the stronger signal.





Morgenmuffel

639 posts

Ultimate Geek
+1 received by user: 58

Lifetime subscriber

  #2134486 26-Nov-2018 14:15
Send private message

yep it is an nf4v, will have to do a bit more research





'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON


Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.