I’m trying to figure out why I can’t see any graph or data in Internet Connection(WAN) tab under Traffic Monitor? Can someone else please check on their side?
I had a similar setup, but with FibreX (HFC), and have to configure the WAN to use VLAN10 via the IPTV setting page of the AC68U. This seems to impact the WAN traffic monitoring as you've noted. I eventually moved the AC68U behind the VF Ultrasound (I.e. double NAT) which meant I could remove VLAN10 from the WAN interface, and fixed the traffic monitoring quirk.
Loftus: I had a similar setup, but with FibreX (HFC), and have to configure the WAN to use VLAN10 via the IPTV setting page of the AC68U. This seems to impact the WAN traffic monitoring as you've noted. I eventually moved the AC68U behind the VF Ultrasound (I.e. double NAT) which meant I could remove VLAN10 from the WAN interface, and fixed the traffic monitoring quirk.
Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly
to your computer or smartphone by using a feed reader.
