Current Hardware:
-Netgear Dg834v3 wired router
-Desktop Main Comp - Vista Plugged direct to Access Point
-Desktop my comp -XP - Using wireless adapter
-Cameo IEEE 802.11g Wireless Lan AP/Router
- Cameo 108MB Super-G USB 2.0 Adapter Rating on coverage is Low

Other:
2.4 Ghz Cordless Phone

Problem:
Wireless keep disconnecting, usually when excess amount of data end and received.

Setup:

Hardware
DG834 is main router connected to Incoming from phone, Access Point is connected to wired router via WAN port.

Vista comp is connect via Ethernet cable to Access point

My comp is connected via wireless into access point, using Usb adapter, about no more than 6m away, upstairs  through one wall, not solid, just wood and plaster.

-----------
Software

Wireless AP is set up with a WPA encryption. With Super G enabled, but dynamic so only works if devices can support 108.mb. In my case.. yes

________

I have been reading about setting up IP addresses. I am very newb to networking and don't understand properly about assigning network IPs.. and subnets....
I think this could be the problem????? I really don't know... tired moving cordless away from wireless.
I know its not the receiver because have tried accessing with other devices and the whole network goes down...APart from DQ834 router is fine... ANything would be great :D ;D thanks