Conection Linksys WRT610N Router to Linksys AM300 ADSL Modem

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Conection Linksys WRT610N Router to Linksys AM300 ADSL Modem

NZ06AR

3 posts

Wannabe Geek

#28225 23-Nov-2008 12:38

Hello,
Any help would be ausome.I ma having trouble getting the wrt610n to conect to the internet. It doesnt have a pppoa option adn from wat i have read and understand i can half bridge the am300 to the wrt610n on pppoe as it has an option for that or can i just dhcp it.
in sayiong this i have tried this but i have never realy fiddled with networking before so this is a new area for me.

manhinli

2483 posts

Uber Geek

Trusted

#179610 23-Nov-2008 12:44

This is a great list of steps to follow.

Just replace RTA1320 with your AM300 (the single port modem) and the "Linksys" with your WRT610N router.

Find me on Twitter!

I posted 1, 2 x 10^3 times!

NZ06AR

3 posts

Wannabe Geek

#179611 23-Nov-2008 12:48

Thanks for the fast repl, i still dnt know wat u mean realy,
all im tryign to do is hve Am300 conecterd to phone line and it pluged into the wrt610n router's internet port.is it just he settings i havent got rite.
also both units are Producing DHCP and have the same unit ip of 192.168.1.1

manhinli

2483 posts

Uber Geek

Trusted

#179612 23-Nov-2008 12:53

I've got a similar setup with my Huawei single port MT882 connected to my Linksys WRT54G - it's all about bridging and setting up the correct IPs.

The post that I linked to above is pretty simple to follow, and you should get the result.

Find me on Twitter!

I posted 1, 2 x 10^3 times!

NZ06AR

3 posts

Wannabe Geek

#184086 14-Dec-2008 18:15

Hey,

I have resorted to not using the AM300 linksys modem, and am now using the Dynalink rta1320. runnign throuth a linksys routher the WRT610N with the internet type set to DHCP.

everything is working just not all of the time. wat i mean is that the internet works intermittently. My PS3 is having the same luck, somethings it manages to log into the net and then it doesnt or it gets disconected.

Any help with this would be ausome as i have spent a while trying to get it working and slowly it is getting frustrating