Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


register@bgjc.ca

2 posts

Wannabe Geek
Inactive user


#3016 23-Dec-2004 08:37
Send private message

Every time I go to advanced config on my BT and go to Local Services and turn on Network Access My Network Interface card (NIC) quits talking to my Intranet and also the Internet. If I turn the Network Access back off the NIC still will not connect.

The only way I have found to fix this is to restore from a previous backup. I am sure there must be an easier fix. Also does anyone know what is causing this?

Create new topic
freitasm
BDFL - Memuneh
80652 posts

Uber Geek
+1 received by user: 41036

Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber

#11294 23-Dec-2004 13:33
Send private message

Two things can be affecting this. First if you tried to configure ICS to allow Internet Sharing via Bluetooth - since a specific IP address is required (192.168.0.1): you may have conflicts if another computer or router on your network uses the same address.

Second is a problem on your Windows configuration, in which case nothing much can be done unless you reinstall the box.




Referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies 

 

Support Geekzone by subscribing (browse ads-free), or making a one-off or recurring donation through PressPatron.

 




register@bgjc.ca

2 posts

Wannabe Geek
Inactive user


#11300 23-Dec-2004 13:56
Send private message

I am not using ICS

Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.