OK - I followed the bluetooth lan setup guide here to connect my Tungsten T to my Dell laptop with a Belkin USB dongle for lan access. I can connect, sign in, and establish a connection to the dell. It is setup for internet sharing.

However, whenever I try anything - such as pinging an address, using Web Pro to open a web page - my Tungsten performs a soft reset. Also - my device doesn't seem to be picking up the correct DNS settings and I can't figure out why.

Here's my win ip settings...

Windows 2000 IP Configuration

Host Name . . . . . . . . . . . . : NaizerJ-LPTP
Primary DNS Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter BlueTooth LAN:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver
Physical Address. . . . . . . . . : 00-02-72-B0-21-C8
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 209.176.33.71
209.176.33.72

Ethernet adapter 802.11:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ORiNOCO PC Card (5 volt)
Physical Address. . . . . . . . . : 00-02-2D-4E-7B-3C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 172.16.0.148
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.16.0.1
DNS Servers . . . . . . . . . . . : 209.176.33.71
209.176.33.72

Ethernet adapter {9DBF4BC0-C63A-43A5-8699-CEAD0CBE95E3}:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NOC Extranet Access Adapter
Physical Address. . . . . . . . . : 44-45-53-54-42-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 172.29.12.21
172.29.12.22


Here's the settings on my tungsten from the log:
service name: bluetooth lan
local ip address: 192.168.0.27
gateway address: 0.0.0.0
dns addresses: 192.168.0.1

Any ideas why my tungsten is resetting and why it's not picking up the correct dns settings? And yes - it's set to query DNS and ip settings.

Thanks

Jonathan