Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


82 posts

Master Geek


Topic # 67604 4-Sep-2010 13:48
Send private message

Hi

I have just purchased a new house and will be doing a complete re-wire of all the voice/data cabling.  I have a great room in the middle of the house that I will use as my 'hub'.  I will be installing a splitter and need some advice as where to place it.

Do I install it at the ETP and run a seperate cable to my room?  Or do I install the spltter in my room?

Thanx

Create new topic
6337 posts

Uber Geek
+1 received by user: 310

Trusted
Subscriber

  Reply # 376576 4-Sep-2010 14:20
Send private message

Can be either, but the ETP is a logical location, whatever you need a line from the ETP (or at the ETP with no splits between the inbound line and the filter) and use the splitter to provide a voice circuit that you can distribute where and how you like and a DSL circuit that should go direct without a break to your modem.

If you are building a hub in the sense of a inwall cabinet with patch panel etc then I would put the filter (and modem) there, so a direct clean unsplit line from the ETP to the hub, then use the filter to seperate voice and DSL.

Cyril

Create new topic

Twitter »

Follow us to receive Twitter updates when new discussions are posted in our forums:



Follow us to receive Twitter updates when news items and blogs are posted in our frontpage:



Follow us to receive Twitter updates when tech item prices are listed in our price comparison site:



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.