Good Morning all,

I am trying to enable a web site on a PLC that I have connected to a telecom 2wire modem.

The website is a very small one and usally connected to by using the internal IP address:8080/webvisu.htm

I can connect from inside the network and have set up to forward traffic on port 8080 to the PLC IP address but I cannot access it from any remote location using the gloabal IP address of the modem.

Is there something that I am missing??

if you want to try and connect the address is 219.89.206.2:8080/webvisu.htm 

The site is a dummy site at the moment used just for testing.

any help would be great and if you need any more information then feel free to ask.