'WIFI' controlled LED bulbs

Forums › Gadgets, robotics, home automation, electronics (including wearables) › 'WIFI' controlled LED bulbs - Limitless LED

1 | ... | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | ... | 55

4706 posts

Uber Geek
+1 received by user: 672

Trusted

#1359311 5-Aug-2015 12:49

How does syncing works between the RGBW remote and 9W RGBW bulb? I got my delivery today, plugged in the bulb and it turned on after 2 seconds. Press the S+ (even tried holding it) as per website support page and no syncing happening. Tried the 2nd bulb but same issue. The remote is showing red color LED in the middle which I assume is ok then.

Do whatever you want to do man.

richms

29100 posts

Uber Geek
+1 received by user: 10216

Trusted

Lifetime subscriber

#1359353 5-Aug-2015 13:29

I thought it was the on button for the zone you want to have the lamp on for all the remotes?

Richard rich.ms

qyiet

454 posts

Ultimate Geek
+1 received by user: 94

Trusted

#1359365 5-Aug-2015 13:34

richms: I thought it was the on button for the zone you want to have the lamp on for all the remotes?

That's the case for the white lights/remote, but I don't have the RGBW or RGBW Remote.

What billgates described was the method for the original RGB bulbs/remote (which I've done via an app version of the RGB remote) but I'm uncertain on the RGBWs

Warning: reality may differ from above post

richms

29100 posts

Uber Geek
+1 received by user: 10216

Trusted

Lifetime subscriber

#1359382 5-Aug-2015 13:45

I just checked it out and definatly a press (not hold) of the 1 on button got an unpaired RGBW R80 unpaired lamp paired up to the remote just fine.

Richard rich.ms

billgates

4706 posts

Uber Geek
+1 received by user: 672

Trusted

#1359390 5-Aug-2015 13:57

I plugged the LED in again at work kitchen room. Pressed 1 within 3 seconds of LED coming on and still nothing. Instructions on website said that it will dim down to let you know that pairing is complete. Any other ideas?

Do whatever you want to do man.

qyiet

454 posts

Ultimate Geek
+1 received by user: 94

Trusted

#1359438 5-Aug-2015 14:37

billgates: Tried the 2nd bulb but same issue... Pressed 1 within 3 seconds of LED coming on

Two bulbs unlikely to both be faulty.. common factor seems to be remote.. batteries possibly?

billgates: it will dim down to let you know that pairing is complete

It does, it's pretty obvious. Besides which it will also respond to commands from the remote :)

Warning: reality may differ from above post

Dell

Shop now for Dell laptops and other devices (affiliate link).

billgates

4706 posts

Uber Geek
+1 received by user: 672

Trusted

#1359450 5-Aug-2015 14:50

Got it. Tried number '4' on the remote controller and it worked. Maybe I did not press 1 hard enough. Also DUHH for not looking inside the box for the supplied instructions. The website needs to be updated through. It asks to use S+ button instead.

Do whatever you want to do man.

richms

29100 posts

Uber Geek
+1 received by user: 10216

Trusted

Lifetime subscriber

#1359452 5-Aug-2015 14:51

I think thats for de-pairing?

Richard rich.ms

got686

2 posts

Wannabe Geek
Inactive user

#1363332 12-Aug-2015 05:05

Good day,

Is there any way to use RGB scheme for colors in controllers? (for using all 3 types of leds on the led strip for example)

richms

29100 posts

Uber Geek
+1 received by user: 10216

Trusted

Lifetime subscriber

#1373042 24-Aug-2015 13:11

Just saw this come up on hackaday. The linked arduino shield has the same RF chip as the limitless/milight gateway I have here, and the lamp looks the same so I am hoping that the arduino code might work connected to the RF chip from the limitless gateway.

My electronics workbench is out of commission at the moment because if pending garage re-cladding so cant really stuff around with it in the near future. But it it works on an arduino then hopefully could port the code to a pi.

edit: helps to put the link http://hackaday.com/2015/08/23/make-your-own-remote-control-led-light/

Richard rich.ms

LimitlessLED

216 posts

Master Geek
+1 received by user: 12

#1374293 25-Aug-2015 23:47

hi rich, I saw your comment on hackaday regarding the limitlessled wifi bridge. if you are having issues with the wifi side, we can replace yours with our latest wifi bridge model, just send us a pm. there should be no issues at all. we have tried hard to ensure there are no known problems with our wifi bridge in 2015. thanks.

Dyson

Shop now for Dyson appliances (affiliate link).

LimitlessLED

216 posts

Master Geek
+1 received by user: 12

#1374294 25-Aug-2015 23:50

you can also talk directly to the LimitlessLED bulbs using the PL1176 RF ardiuno or pi2 shields also. the specs and commands are on the www.limitlessled.com/dev site.

LimitlessLED

216 posts

Master Geek
+1 received by user: 12

#1374316 26-Aug-2015 00:31

Their ESP8266/PL1176 wifi bridge is quite expensive at 39.90 Euro ($45.82 USD) considering it has the same components as a limitlessled wifi bridge which is $17USD (HF-LPT100/PL1176)

You could attempt to take over the limitlessLED HF-LPT100 microchip, in the same way that the ESP8266 microchip has been by the DIY community.

got686

2 posts

Wannabe Geek
Inactive user

#1374319 26-Aug-2015 00:56

LimitlessLED: you can also talk directly to the LimitlessLED bulbs using the PL1176 RF ardiuno or pi2 shields also. the specs and commands are on the www.limitlessled.com/dev site.

I know API and use it, but all colors in table has been combined by 2 from 3 leds in 5050 smd (green+red or green+blue red+blue) and I no see ways to use all three (red+green+blue, for example 20% of red, 30 of blue and 50% of green). May be you know about walk around?

LimitlessLED

216 posts

Master Geek
+1 received by user: 12

#1375466 28-Aug-2015 02:38

Hi Hamish,

Just thought I’d let you know, installed new bridge, all working perfectly, been
running now for about 4 weeks, no problems at all, looks like that’s fixed any outstanding problems.

Thanks very much

Wayne

1 | ... | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | ... | 55