Anyone have a Segger J-LINK JTAG connector lying around?

Forums › Gadgets, robotics, home automation, electronics (including wearables) › Anyone have a Segger J-LINK JTAG connector lying around?

kenkeniff

628 posts

Ultimate Geek
+1 received by user: 88

#133703 31-Oct-2013 10:13

Does anyone have a Segger J-LINK JTAG connector lying around that I could borrow for a couple of hours (I'm in Auckland CBD).

I got one of these:

http://www.proxmark.org/

Which I need to recover the firmware on:

https://code.google.com/p/proxmark3/wiki/Compiling#JTAG_Recovery_Procedure

Thanks

Niel

3267 posts

Uber Geek
+1 received by user: 80

Trusted

#926215 2-Nov-2013 12:01

We might have one at work, but isn't it just a standard JTAG pinout? Or do you also need the J-Link and not just the connector?

You can never have enough Volvos!

kenkeniff

628 posts

Ultimate Geek
+1 received by user: 88

#926217 2-Nov-2013 12:06

Any JTAG connector will probably do, the instructions are just for that model. Let me know if you find one. Thanks

kenkeniff

628 posts

Ultimate Geek
+1 received by user: 88

#936736 18-Nov-2013 15:49

Still looking if anyone has a JTAG connector?

Cheers

StevenWg

51 posts

Master Geek
+1 received by user: 6

ID Verified

#940606 25-Nov-2013 20:07

Hi, I got one if you need. PM me

Nothing happened.

kenkeniff

628 posts

Ultimate Geek
+1 received by user: 88

#951428 13-Dec-2013 09:03

Thanks, I ended up getting a Bus Pirate from MindKits which did the trick: http://www.mindkits.co.nz/store/prototyping/Bus-Pirate

[In case anyone else finds this useful]