The backstory to this project is my daughter had inserted my credit card into the optical drive. The only way to remove the card was to remove the optical drive.

I was following https://www.ifixit.com/Guide/PlayStation+4+CUH-1200+Entire+Console+Disassembly/52475 and when I got to step 9 I seemed to have run into the same problem a few others have had.

Rather than the cable popping out of the connector, the entire connector detached from the board. So my connector is now detached with three of the four pins showing a bit of the PCB.

I'm assuming the connector/board can be cleaned and reattached via solder, can anyone recommend a business/individual that is proficient at doing this?