I have a Sangean WFR-28D which I believe the PowerSupply has gone on it.
It requires a '7.5 volts DC at 1.6 A center pin negative '
Which Power Supply from the Jaycar product range would be suitable for the device?
thank you
|
|
Your best bet is to take it in with you, since you will need to make sure that the barrel connector fits anyway. Most of the jaycar ones have a range of connectors (which you can make center pin negative/positive by flipping around), but I have found the odd thing that doesn't fit any of their standard options.
If you're not in a hurry, you can also just buy the appropriate PSU off eBay.
why do they come up with such oddballs!
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
Found what I needed at Jaycar.
Multi voltage - set it to 7.5V
Max 2.25a
The radio runs, so I reckon all good :-)
The little things make the biggest difference.
hio77:why do they come up with such oddballs!
If it was Sony I'd say so you're forced to buy Sony replacement power supplies at ten times the price of a non-Sony one, but with Sangean, who knows.
|
|