Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Psilan

860 posts

Ultimate Geek
+1 received by user: 94


#29178 27-Dec-2008 18:15
Send private message

I bought a house from a deceased estate in September (chch). Was told the alarm was disabled by the agent, but now after bumping a white telepermit stickered box I have set the alarm off, which is continuing to go off.

Any tech familiar with resetting a SOLUTIONS 880 alarm?
Also called EDM SOLUTIONS or BOSCH SOLUTIONS.

Would be very grateful for the help.




Voyager referral - https://refer.voyager.nz/68QKJ8XKK


Create new topic
sbiddle
30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod
Trusted
Biddle Corp
Lifetime subscriber

  #186291 27-Dec-2008 18:42
Send private message

The box would have been the alarm panel which obviously had a temper switch in it.

I'm assuming you don't have a code? Not much you can do without this except cut the wire to the siren to stop the noise.

Most alarms will reset after a few siren cycles.





Psilan

860 posts

Ultimate Geek
+1 received by user: 94


  #186292 27-Dec-2008 18:48
Send private message

I rung an installer and got a pin, and it semi-worked. Now if I trigger any of the sensors the console beeps like mad (still quite loud).
During this beeping the alarm disconnects my phones and internet, and all I hear on the line is the sound of the house amplified like there is a microphone somewhere.

Installer advised how to disconnect battery and cut power to the whole system also. Was good for him to talk over the phone, but he wasn't too much help.




Voyager referral - https://refer.voyager.nz/68QKJ8XKK


Dipsylow
1 post

Wannabe Geek


  #186437 28-Dec-2008 21:52
Send private message

Hi

My Solutions 880 alarm was registering a fault. I found an online manual for alarm on the following page
http://www.prestigealarms.com.au/downloads/BOSCH-SOLUTION-880-OPERATORS-MANUAL.pdf

I hope this helps



Psilan

860 posts

Ultimate Geek
+1 received by user: 94


  #186439 28-Dec-2008 22:30
Send private message

I now have 3 manuals for this alarm! But that looks like the best one by far, thank you for that.




Voyager referral - https://refer.voyager.nz/68QKJ8XKK


Psilan

860 posts

Ultimate Geek
+1 received by user: 94


  #186548 29-Dec-2008 17:55
Send private message

Got help at lunchtime today from a tech at work. Disconnected battery and main power. Ready to be setup if needed in the future.
Thanks all.




Voyager referral - https://refer.voyager.nz/68QKJ8XKK


antoniosk
2382 posts

Uber Geek
+1 received by user: 742

ID Verified
Trusted
Lifetime subscriber

  #186586 29-Dec-2008 21:17
Send private message

If it's any consolation, once you get the alarm monitored and running the way you want it's actually rather good. i set it off when I first moved into our house... pulled the mains and battery power in the end.




________

 

Antoniosk


Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.