Wanted Low Profile Dual DVI S-Video and VGA Bracket

To post in this sub-forum you must have made 100 posts or have Trust status or have completed our ID Verification

Forums › Offers and Wanted › Wanted Low Profile Dual DVI S-Video and VGA Bracket

jimbob79

673 posts

Ultimate Geek
+1 received by user: 165

#208480 13-Feb-2017 21:19

I just got my hands on a cheap graphics card ($20) and I would like to get my hands on one of theses brackets to fit my computer. The VGA port need to be on the right (just like the photo).

The cheapest I can find is $9.84 (not inc delivery) here at:

http://www.projector-lamps.co.nz/product.aspx?productid=270001

Do you have anything kicking around??

andrewNZ

2487 posts

Uber Geek
+1 received by user: 1461
Inactive user

#1719738 13-Feb-2017 22:26

Where are you located?
Does it need to be a s-video one?

I have 2 sets of hdmi ones. They're seperates, meaning the vga can be on whichever side you chose. Ive only had one come as a one piece, I cut it in half.

jimbob79

673 posts

Ultimate Geek
+1 received by user: 165

#1719860 14-Feb-2017 10:08

Hi I'm in the Wellington area. I've got the original double low-profile bracket it's just that the VGA port is on the left and side. I can't use this bracket because is fowls against the case. Actually I could get away with a single low-profile bracket which just has the DVI and S-VIDEO ports. I can disconnect the VGA port.

andrewNZ

2487 posts

Uber Geek
+1 received by user: 1461
Inactive user

#1720149 14-Feb-2017 17:28

Have you got a hacksaw? Cut it in half so you have singles instead, problem solved.