I have two Cisco 827 ADSL Routers sitting in my roof unused at the moment as I have Cable Internet at home.

Both have 8MB flash, one has 16MB ram, the other has 20MB ram.

They are Cisco 827 ADSL 1 (not 2+) routers, have worked well for me for years when I was on Telecom ADSL.

Can also download any flash (vpn/ipsec/firewall support etc) you want, so far I just had basic IOS on there. From memory the VPN IOS was too large for the flash, or needed more ram.

Will load up a standard ADSL config so all you will need to do is plug in your username & password and you should be away.

$50, or make me an offer.

Pickup in Wellington.

EDIT: Below is the bootup for the two boxes:

#1
Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(4)YA9, RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(5.4)T

CISCO C827 (MPC855T) processor (revision 0x801) with 19456K/1024K bytes of memory.
Processor board ID JAD06230FNW (2381927959), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

#2
IOS (tm) C827 Software (C827-Y6-M), Version 12.1(1)XB, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

CISCO C827 (MPC855T) processor (revision 0x501) with 15360K/1024K bytes of memory.
Processor board ID JAD04340NNM (4155284139), with hardware revision 6711
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)