Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.
To post in this sub-forum you must have made 100 posts or have Trust status or have completed our ID Verification



pbgben

261 posts

Ultimate Geek


#224141 4-Nov-2017 15:50
Send private message

$400 ono

 

3D printer and PCB Mill combo with OrangePi based controller (Repitier Server and CNCjs)

 

Located in Silverdale, Auckland. Can deliver on my route to the airport on Monday afternoon.  

 

 

 

 

 

Instagram with a peppering of shots of these in operation: https://www.instagram.com/pbgben/





Create new topic
hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1895320 4-Nov-2017 20:14
Send private message

got any shots of a finished PCB from it?





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 




pbgben

261 posts

Ultimate Geek


  #1895323 4-Nov-2017 20:18
Send private message

hio77:

 

got any shots of a finished PCB from it?

 

 

 

 

https://www.instagram.com/p/BY2tFGRgPnx/?taken-by=pbgben

 

I can mill another board tomorrow for a photo if you like, it'll come with a few of those single sided copper boards too. 





hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1895351 4-Nov-2017 22:07
Send private message

pbgben:

 

hio77:

 

got any shots of a finished PCB from it?

 

 

 

 

https://www.instagram.com/p/BY2tFGRgPnx/?taken-by=pbgben

 

I can mill another board tomorrow for a photo if you like, it'll come with a few of those single sided copper boards too. 

 

 

saw this one, was more curious of the final product





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 




pbgben

261 posts

Ultimate Geek


  #1895452 5-Nov-2017 12:16
Send private message

hio77:

 

pbgben:

 

hio77:

 

got any shots of a finished PCB from it?

 

 

 

 

https://www.instagram.com/p/BY2tFGRgPnx/?taken-by=pbgben

 

I can mill another board tomorrow for a photo if you like, it'll come with a few of those single sided copper boards too. 

 

 

saw this one, was more curious of the final product

 

 

 

 

I'll need to mill a board as I dont have any around, is there one you would like me to mill? Else, I will just do a random one. 





pbgben

261 posts

Ultimate Geek


  #1895494 5-Nov-2017 14:23
Send private message

hio77:

 

pbgben:

 

hio77:

 

got any shots of a finished PCB from it?

 

 

 

 

https://www.instagram.com/p/BY2tFGRgPnx/?taken-by=pbgben

 

I can mill another board tomorrow for a photo if you like, it'll come with a few of those single sided copper boards too. 

 

 

saw this one, was more curious of the final product

 

 

 

 

One pass for traces, and a second for the drill. The trace width was wrong for the drill I used, but thats my fault. can also see that there is a bed level/pcb flatness thing, can be resolved via deeper cut or manual leveling.

 

https://www.instagram.com/p/BbGEvq3AbrF/?taken-by=pbgben





hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1895502 5-Nov-2017 15:08
Send private message

pbgben:

 

One pass for traces, and a second for the drill. The trace width was wrong for the drill I used, but thats my fault. can also see that there is a bed level/pcb flatness thing, can be resolved via deeper cut or manual leveling.

 

https://www.instagram.com/p/BbGEvq3AbrF/?taken-by=pbgben

 

 

Impressive result, Is tempting.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 


pbgben

261 posts

Ultimate Geek


  #1895504 5-Nov-2017 15:21
Send private message

hio77:

 

pbgben:

 

One pass for traces, and a second for the drill. The trace width was wrong for the drill I used, but thats my fault. can also see that there is a bed level/pcb flatness thing, can be resolved via deeper cut or manual leveling.

 

https://www.instagram.com/p/BbGEvq3AbrF/?taken-by=pbgben

 

 

Impressive result, Is tempting.

 

 

 

 

Will come with 7 more blank's, can get more from aliexpress for cheap. Several spare cutting and drill's all the same size. 

 

Printer has a fair amount of PLA left, some white and red.

 

Price is fair imo, if you collect from me before lunch tomorrow I will knock off $50





Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.