[FS] 2 x LevelOne mini GBIC to 1000T Converters + miniGBIC modules

To post in this sub-forum you must have made 100 posts or have Trust status or have completed our ID Verification

Forums › Offers and Wanted › [FS] 2 x LevelOne mini GBIC to 1000T Converters + miniGBIC modules

jaymz

1133 posts

Uber Geek

#236468 4-Jun-2018 10:15

Both items are brand new, the boxes were only opened to get some photos and double check they are correct.

I brought these when i planned to run a fibre lead to the garage, but instead used a Ruckus wireless AP to acheive the same thing and these have sat since.

The miniGBIC details are:
Model number: GVT-0300
850nm Multi-mode Transceiver
1000 Base-SX, 550m
Small Form Pluggable (SFP), 3.3V
Duplex LC Connector
http://nz.level1.com/Fiber-Optical-Transceiver/GVT-0300/p-709.htm

The Converter details are:
Model Number: GVT-1000
https://www.cnet.com/products/levelone-procon-gvt-1000-fiber-media-converter-gige/specs/

Looking for ~$300 for the whole lot. Can ship at buyers expense or drop off within Hamilton area (where i am located)

Photos:

jaymz

1133 posts

Uber Geek

#2033712 11-Jun-2018 14:50

BUMP

Any offers? Open to anything resonable

pbolger

241 posts

Master Geek

#2034076 12-Jun-2018 07:57

Did you end up buying any actual fibre?

jaymz

1133 posts

Uber Geek

#2034135 12-Jun-2018 09:02

pbolger:

Did you end up buying any actual fibre?

Only a short 2m lead to test it all out on, but never opened it to use. I can include it with the sale if anyone wants it?

pbolger

241 posts

Master Geek

#2034239 12-Jun-2018 10:58

I have a couple of Mikrotik switches with SFP ports.

What would these do that the Mikrotiks don't - barring the actual transceivers?

jaymz

1133 posts

Uber Geek

#2034251 12-Jun-2018 11:17

pbolger:

I have a couple of Mikrotik switches with SFP ports.

What would these do that the Mikrotiks don't - barring the actual transceivers?

Pretty much the same thing.

Normally you would use these in a setup where you wanted to run fibre between two locations that didnt have switches at each end to handle the fibre media conversion.

EG you have a core switch and an edge switch. Both switches only have RJ45 LAN ports. You run a fibre lead between the two switches and use the media converters (for sale) to connect into each switch

Kinda a specialised setup/need, but hopefully that makes a bit of sense?

pbolger

241 posts

Master Geek

#2034844 13-Jun-2018 09:44

Yes, thanks. Probably not what I need at the moment, although the prospect of getting a pile of new toys to play with is tempting!

jaymz

1133 posts

Uber Geek

#2040917 20-Jun-2018 10:39

Final bump

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

jaymz

1133 posts

Uber Geek

#2069197 7-Aug-2018 10:48

Loaded on Trademe for $1 reserve