Last bits of network gear. Send me an offer

1x Cisco SG200-28P Switch - 28 poe ports, about 5 years old, out of a low usage site, rack mounted with fans

2x Cisco SG300-52P Switches - 52 poe ports, about 5 years old, out of a medium usage site, server room with cooling

about 30x Aerohive 121 - http://www.aerohiveworks.com/Aerohive-AP121.asp 

about 15x Aerohive 141 - http://www.aerohiveworks.com/Aerohive-AP141.asp 

Both support 2x2 Wireless N, at 2.4ghz and 5ghz. Pretty easy to get a solid 300mbit setup, also can be meshed. They will need poe injectors or switch (doesnt come with them sorry)

You do though need to manage these manually via SSH since no one is going to pay aerohive for their online portal. Instructions below, its rather easy to get up and running, however I have not tested this as of yet:

https://www.reddit.com/r/sysadmin/comments/1sg90l/aerohive_hivemanager_va/

 

•  

  Just factory reset the device (there is a pin hole at the back clearly labeled)

   

•  

  Plug it into your network and it will grab an IP from you DHCP

   

•  

  ssh admin@x.x.x.x (default password is: aerohive)

   

•  

  Customize the below and copy and paste it into the ssh console:

   

 

security-object away

 

 

security-object away security protocol-suite wpa2-aes-psk ascii-key *

 

 

ssid away

 

 

ssid away security-object away

 

 

interface wifi1 mode access

 

 

interface wifi0 ssid away

 

 

interface wifi1 ssid away

 

 

hostname ap-lampson

 

Very cost effective solution for having a decent 802.11n capable of 2.4 & 5 GHz!

And another blog about it: https://words.bombast.net/basic-cli-configuration-for-an-aerohive-ap230/