GPS tracker CAT M1

Forums › GPS, maps and mapping software › GPS tracker CAT M1

1 | 2 | 3

phrozenpenguin

840 posts

Ultimate Geek

#2406904 25-Jan-2020 22:37

phrozenpenguin:

davidcole:

phrozenpenguin:

Following your update I have ordered the one linked by @davidcole - is there anything specific I should know if I want to set this up with Traccar (which I already have running and working)?

I will be using a 2Degrees SIM (PAYG) with data sharing from my main contract. I suspect I might need some credit in order to use SMS to setup?

This is the port I use: <entry key='tk103.port'>5002</entry>

So that's the protocol it uses. Yes you will need sms credit, just so it can respond with ok.

Great thanks. Will endeavour to update this when I have got and tested it.

I now have this devices and have wired it up and set it up with a SIM card and got it talking to my Traccar server via the un-documented command mentioned above. I'm wondering @davidcole what tracking method you use, and what command(s) you used to set it up. I have managed to stop it calling me whenever it moved after staying stationary, but have had a trip where it was online/offline, and now it just seems to report on power on. I'm still experimenting, but any hints appreciated!

davidcole

6034 posts

Uber Geek

Trusted

#2406913 26-Jan-2020 01:35

phrozenpenguin:

phrozenpenguin:

davidcole:

phrozenpenguin:

Following your update I have ordered the one linked by @davidcole - is there anything specific I should know if I want to set this up with Traccar (which I already have running and working)?

I will be using a 2Degrees SIM (PAYG) with data sharing from my main contract. I suspect I might need some credit in order to use SMS to setup?

This is the port I use: <entry key='tk103.port'>5002</entry>

So that's the protocol it uses. Yes you will need sms credit, just so it can respond with ok.

Great thanks. Will endeavour to update this when I have got and tested it.

I now have this devices and have wired it up and set it up with a SIM card and got it talking to my Traccar server via the un-documented command mentioned above. I'm wondering @davidcole what tracking method you use, and what command(s) you used to set it up. I have managed to stop it calling me whenever it moved after staying stationary, but have had a trip where it was online/offline, and now it just seems to report on power on. I'm still experimenting, but any hints appreciated!

ahh yeah there’s a couple. I should document them.

Previously known as psycik

Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight

davidcole

6034 posts

Uber Geek

Trusted

#2406930 26-Jan-2020 08:39

@phrozenpenguin

Look these up but I run:

*rsampling*10* - set sampling rate in seconds

*rupload*20*

*routetrack*99* - this is the big one that sets it to upload contantly

*multiquery* if you have more than one device that can send sms to it (probably specific to me as I had a seperate phone for texting it)

*alertoff* else it'll ring/sms you

If you set a sampling rate too quick it'll get in a loop. One thing I haven't figured out, is with my old one it ws fast enough I could actually get an alert set up when over 105km, this one I can't get it to do that. it seems to store waypoints and upload in batches. Could possibly play with the rupload and set that much smaller. but hey it's working, so I just leave it.

phrozenpenguin

840 posts

Ultimate Geek

#2408199 28-Jan-2020 13:42

Thanks. I'm still experimenting.

In Traccar, does it flick online/offline (online immediately after upload, offline soon after, until next upload)? I haven't worked out yet if there is a specific combination of timeouts required, but on devices with more confugration settings you would set it to keep the connection open. It seems this drops the connection after each upload.

I haven't looked into alerting yet.

davidcole

6034 posts

Uber Geek

Trusted

#2408214 28-Jan-2020 14:05

phrozenpenguin:

Thanks. I'm still experimenting.

In Traccar, does it flick online/offline (online immediately after upload, offline soon after, until next upload)? I haven't worked out yet if there is a specific combination of timeouts required, but on devices with more confugration settings you would set it to keep the connection open. It seems this drops the connection after each upload.

I haven't looked into alerting yet.

No traccar does seem to think it's online. Not sure how low you could set that rupload and see if it constantly uploads.

phrozenpenguin

840 posts

Ultimate Geek

#2412643 4-Feb-2020 19:58

Thanks. I think this has resolved my issue. Interestingly the manual says a lower limit of rupload of 60sec - but 20 as you describe seems to work.

1 | 2 | 3